Jetson & Embedded Systems Jetson Xavier NX
| Topic | Replies | Views | Activity | |
|---|---|---|---|---|
|
Jetpack 5.0.2 with Jetson Linux 35.1 is now live!
We are very pleased to announce that JetPack 5.0.2 is now released! JetPack 5.0.2 production release replaces JetPack 5.0/5.0.1 Developer preview release which were for development purposes only. JetPack 5.0.2 is the fi… |
|
29 | 1240 | September 26, 2022 |
|
Announcing Jetson Partner Development Systems
We are pleased to announce NVIDIA Jetson Partner Development Systems, available for immediate purchase. These Xavier NX and AGX Xavier development systems include an NVIDIA ecosystem partner carrier board with productio… |
|
1 | 2521 | January 25, 2022 |
|
Jetson Software Roadmap for 2H-2021 and 2022
NVIDIA continuously invests in JetPack and regularly ships software updates to enable performance improvements, new capabilities, and support for new modules and developer kits. In this announcement, we provide details a… |
|
2 | 5192 | May 28, 2021 |
|
GPIO customization on Jetson Platform
This is the example for users to find the relationship between GPIO PINs and GPIO num. The followed information captured from Jetson NX. From Pinmux to find the right ball name and customer usage. eg: GPIO00 GPIO00 8… |
|
3 | 6615 | May 27, 2022 |
|
Jetson Xavier NX FAQ
Q: How to install old version JetPack from SDK Manager? A: Run below commands: $ sdkmanager --archivedversions Q: R32.5.2 BSP is not listed in SDKManager. How to install SDK Components? A: Please install through apt … |
|
2 | 6703 | November 13, 2020 |
|
Official TensorFlow for Jetson AGX XavierNX
Here is the information of official TensorFlow release for XavierNX. Python 3.6+JetPack4.5 sudo apt-get install libhdf5-serial-dev hdf5-tools libhdf5-dev zlib1g-dev zip libjpeg8-dev liblapack-dev libblas-dev gfortran s… |
|
11 | 9235 | March 30, 2022 |
|
Links to Jetson Xavier NX Resources & Wiki
Welcome to the Jetson Xavier NX forum! Here is a collection of links & resources available for Jetson Xavier NX: Jetson Xavier NX Homepage Jetson Xavier NX Wiki Jetson Xavier NX Orders Jetson Xavier NX Technical Blo… |
|
2 | 9137 | August 4, 2020 |
|
Service
|
|
4 | 51 | October 1, 2022 |
|
How do I pass gstreamer a NvBuffer as a source for the omxh265enc
|
|
0 | 14 | September 30, 2022 |
|
Xavier NX R32.7.1 changes to DTSI Overlay for cameras has no effect
|
|
8 | 74 | September 30, 2022 |
|
Managed to flash jetson xavier nx custom board with JP462 not JP502
|
|
41 | 204 | September 30, 2022 |
|
Kernel panic on Jetpack 4.6.1 Xavier NX
|
|
5 | 83 | September 30, 2022 |
|
M.2 NVMe sometimes not detected - removing nvme from boot-order helps
|
|
1 | 18 | September 30, 2022 |
|
Downgrade from Jetpack5.02 to Jetpack4.x
|
|
2 | 33 | September 30, 2022 |
|
NvCompositor SIGSEGV
|
|
0 | 20 | September 30, 2022 |
|
Clone Dev Kit SD card to production system
|
|
12 | 81 | September 30, 2022 |
|
Libargus + Gstreamer in a Docker container
|
|
1 | 34 | September 30, 2022 |
|
Proper dev toolchain for ROS2 Humble in dusty's pre-built docker image on a remote Xavier NX
|
|
2 | 41 | September 30, 2022 |
|
Jetpack 5.0.2 - Nvidia Jetson Xavier NX - Boot device
|
|
4 | 76 | September 30, 2022 |
|
Jetson NX SOM Wake up time too long
|
|
0 | 26 | September 30, 2022 |
|
Regarding state of the successful RAW12 capture and related queries
|
|
1 | 46 | September 30, 2022 |
|
Jetpack 5.0.2 camera driver port leads to tegra-capture-vi timeout
|
|
13 | 68 | September 30, 2022 |
|
Jetpack 5.02 boot from nvme
|
|
13 | 63 | September 30, 2022 |
|
Configure mcp2515 on jetpack 5.02
|
|
3 | 49 | September 30, 2022 |
|
Jetpack5.0.1刷入系统成功，不能进入桌面
|
|
7 | 46 | September 30, 2022 |
|
Jetpack 5.0.2 cs-gpios in device tree (SPI, Jetson Xavier NX)
|
|
0 | 13 | September 30, 2022 |
|
JP 5.0.2 nv-l4t-bootloader-config service fails
|
|
15 | 69 | September 30, 2022 |
|
Failed to boot the JetsonXavierNX device from the USB flash drive
|
|
30 | 110 | September 30, 2022 |
|
Tegra194-vi5 Error Correction Question
|
|
0 | 28 | September 30, 2022 |
|
Jetpack 4.6.2 - RxData DMA copy to tty layer failed
|
|
0 | 36 | September 29, 2022 |