Hello , We have two imx415 sensors connected to Tx2 with custom board. Cameras can work individualy but when we connect them together sometimes it works sometimes it gave errors. These are output log from : journalctl -u nvargus-daemon.service Feb 22 15:46:36 4-4-1 systemd[1]: Started Argus daem…

Have a try below patch to disable the crc/ecc error. [image] tx2 - Camera mipi timing and PXL_SOF Jetson TX2 Below patch to disable payload CRC error check. And this sensor need modify embedded_metadata_height = “4”; After this the v4l2-ctl should be able capture well. …

2 Csi-mipi Camera Error on Tx2

Autonomous Machines Jetson & Embedded Systems Jetson TX2

ShaneCCC February 26, 2021, 7:47am 5

Have a try below patch to disable the crc/ecc error.