Continuing the discussion from 4 lane mipi csi2 to 2 lane mipi interface : Hello, I have the same problem using the dev kit ORIN NX I consulted the document quoted in the previous post but I did not find the answer is it possible to bring me an answer on this subject? thank you.

4 lanes MIPI CSI-2 to 2 lanes

ShaneCCC March 1, 2024, 1:17am 3

Just configure the port-index/bus-width and num_lanes in the sensor mode.
Also configure sensor REG to output by 2 lanes configure.

Topic		Replies	Views
4 lane mipi csi2 to 2 lane mipi interface Jetson Xavier NX camera	2	2486	October 18, 2021
about mipi csi interface Jetson TX2	2	704	October 18, 2021
Camera Suggestion for 1-lane Mipi CSI-2 Camera Jetson TX2 camera	6	1585	October 18, 2021
Capturing Image from custom sensor fails with 4-csi lanes Jetson Orin NX camera	9	62	July 1, 2025
Connector MIPI 2 and 4 lanes Jetson Nano	2	1111	October 18, 2021
Can you configure Orin NX MIPI CSI for one 4-lane plus two 2-lane cameras? Jetson Orin NX camera	2	688	November 7, 2022
Mipi-csi video interface on Nano carrier board B01 Jetson Xavier NX camera	2	527	October 18, 2021
4 lanes MIPI CSI-2 camera on XavierNX DevKit Jetson Xavier NX camera	4	778	October 18, 2021
4 lane mipi camera Jetson TX2	2	639	October 18, 2021
MIPI 4 lane CSI-0 and CSI-2 can't get video on Orin NX Jetson Orin NX camera	4	336	March 27, 2024