About dtb name verification to be applied to Xavier nx production (emmc) module

Hello,

xavier nx product number:

jetpack ver: # R32 (release), REVISION: 6.1, GCID: 27863751, BOARD: t186ref, EABI: aarch64, DATE: Mon Jul 26 19:36:31 UTC 2021

When I checked which dtb was used on dmesg, it came out as follows.
/hardware/nvidia/platform/t19x/jakku/kernel-dts/tegra194-p3668-all-p3509-0000.dts

After booting the jetson xavier nx production module, I checked the dtbs under the /boot directory and was able to narrow the scope to the ones in the yellow box as follows.

When I checked which dtb was used on dmesg, it came out as follows.

After booting the jetson xavier nx production module, I checked the dtbs under the /boot directory and was able to narrow the scope to the ones in the yellow box as follows.

I’m not exactly sure which dtb to specify when i specify the dtb file as FDT in /boot/extlinux/extlinux.conf

which one should i specify?

I’ll attach the full dmesg.
dmesg_xavier_nx_emmc_dmesg_jp46.txt (62.7 KB)

Thank you.

Go back to your host… check which dtb is be flashed to the board…

1 Like

This is not related to you original quesiton. Please file new topic to ask.

1 Like

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.