about Jetson TX2 recovery mode

Autonomous Machines Jetson & Embedded Systems Jetson TX2
#1

Thank you for reading this post.

To setup Jetson TX2 recovery mode, I must connect TX2 USB port and host PC.
Host PC is required ‘Linux’.
Can I have host pc on multibooting?

I look forward to hearing from you.

#2

Hi jc.jang, yes you can dual-boot your host PC. VM is not officially supported, but dual-boot or multi-boot is a native install.

Note that for JetPack 3.2, Ubuntu 16.04 x86_64 is supported. For JetPack 3.1 and earlier, Ubuntu 14.04 x86_64 is supported.

#3

thank you for reply.

thank you.

#4