# About Xavier Flash problem

**URL:** <https://forums.developer.nvidia.com/t/about-xavier-flash-problem/188359>\
**Category:** Jetson AGX Xavier\
**Tags:** boot\
**Created:** [September 3, 2021, 1:06am UTC](https://forums.developer.nvidia.com/t/about-xavier-flash-problem/188359 "2021-09-03T01:06:47Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![rico.deng](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/rico.deng/32/22006_2.png) [@rico.deng](https://forums.developer.nvidia.com/u/rico.deng)\
**Post date:** [September 3, 2021, 1:06am UTC](https://forums.developer.nvidia.com/t/about-xavier-flash-problem/188359/1 "2021-09-03T01:06:47Z")

</div>

Hi:  
We have two Xavier, one kit and one Moudle  
use our own carrier board,the developer kit moudle(remove it from the development kit) flash successful ,but the module was failed.  
The above is two logs are used for the same image employed by the successful and unsuccessful flash .use the same instraction:sudo ./flash.sh jetson-agx-xavier-devkit mmcblk0p1  
we has try another PC, is the same ,stuck in:[10.0629] tegrarcm\_v2 --isapplet  
do you have any suggestion for this, thanks  
[flash\_ok.txt](https://forums.developer.nvidia.com/uploads/short-url/bj3sS8ix5x4Nx2WvK0K5a4orGgy.txt) (540.3 KB)  
[flash\_fail.txt](https://forums.developer.nvidia.com/uploads/short-url/qdu9wrWTwJzyrSFyMr7g4HXv9YH.txt) (63.9 KB)

 ![WeChat Image_20210903090521](https://global.discourse-cdn.com/nvidia/original/3X/f/f/ff4d7d3b7ae5af6701dae2239d7b8a7c929fa884.jpeg)

---

<div class="post-metadata">

**Author:** ![linuxdev](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/linuxdev/32/10243_2.png) [@linuxdev](https://forums.developer.nvidia.com/u/linuxdev)\
**Post date:** [September 3, 2021, 7:22pm UTC](https://forums.developer.nvidia.com/t/about-xavier-flash-problem/188359/3 "2021-09-03T19:22:18Z")

</div>

To know more it is far easier to see a full log rather than a screenshot. You could attach a log to the forum and it would be searchable. Using your flash command, but with logging, try this:  
`sudo ./flash.sh jetson-agx-xavier-devkit mmcblk0p1 2>&1 | tee log_flash.txt`

---

<div class="post-metadata">

**Author:** ![TomNVIDIA](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/tomnvidia/32/14181_2.png) [@TomNVIDIA](https://forums.developer.nvidia.com/u/TomNVIDIA)\
**Post date:** [October 18, 2021, 6:18pm UTC](https://forums.developer.nvidia.com/t/about-xavier-flash-problem/188359/5 "2021-10-18T18:18:57Z")

</div>

Closed on October 18, 2021, 6:18pm UTC


