The image is long, the average of a picture is 325 seconds, when the resolution is 328090, when the resolution is 1280x, the speed is 105 milliseconds, or too long, my goal is to be within 10 milliseconds.

acquireFrame 获取照片时间过长

DaneLLL December 28, 2023, 6:56am 12

Hi,
If sensor driver is good, you can capture frame data through v4l2-ctl commands. Please refer to the command forJetson Nano + RPi camera v2:
How to set exposure and gain parameters for IMX219 with v4l2-ctl?

Topic		Replies	Views
Jetson_multimedia_api ->09_camera_jpeg_capture, call acquireFrame err! Jetson Nano mmapi	2	477	October 15, 2021
The camera stops after a fixed time (24h-48h) when reading the dual camera on jetson nano Jetson Nano camera , gstreamer	7	373	April 1, 2024
Argus camera Frame acquire timeout occurring randomly Jetson TX2 camera	6	1122	November 9, 2022
Help with acquireFrame delay in simple capture loop Jetson TX2	1	668	May 24, 2018
Argus-daemon error after several hours of using the camera Jetson Nano camera	2	573	October 15, 2021
Argus's ICaptureSession captureBurst with PIXEL_FMT_RAW16 hanging on 6th burst capture Jetson Nano camera	15	913	October 15, 2021
Camera connected to Jetson Orin Nano stops after long test: Seeking solutions for nvargus-daemon errors Jetson Orin Nano camera , gstreamer , nvbugs	8	943	January 5, 2024
Why did the camera start with a high probability timeout the first time ?and the second time start ok? Jetson AGX Xavier	7	538	October 31, 2019
Argus error Jetson Orin NX camera	29	104	July 29, 2025
Raspberry pie camera will automatically turn off after less than 20 minutes of use on orin nano8gb Jetson Orin Nano camera	13	407	August 29, 2023