# AGX input voltage

**URL:** <https://forums.developer.nvidia.com/t/agx-input-voltage/127222>\
**Category:** Jetson AGX Xavier\
**Tags:** power\
**Created:** [June 10, 2020, 5:46pm UTC](https://forums.developer.nvidia.com/t/agx-input-voltage/127222 "2020-06-10T17:46:11Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![wolfram161](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@wolfram161](https://forums.developer.nvidia.com/u/wolfram161)\
**Post date:** [June 10, 2020, 5:46pm UTC](https://forums.developer.nvidia.com/t/agx-input-voltage/127222/1 "2020-06-10T17:46:11Z")

</div>

I’m working on a project that requires constrained power consumption without performance compromises. So in MAXN mode which input voltage I should choose between 9-20V to ensure minimum loss at Xavier’s power circuit ?

---

<div class="post-metadata">

**Author:** ![linuxdev](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/linuxdev/32/10243_2.png) [@linuxdev](https://forums.developer.nvidia.com/u/linuxdev)\
**Post date:** [June 10, 2020, 9:26pm UTC](https://forums.developer.nvidia.com/t/agx-input-voltage/127222/2 "2020-06-10T21:26:22Z")

</div>

Technically any voltage in that range should work _if the voltage is very stable_. I think I’ve seen notes suggesting (without any particular proof) that the higher 19.0V might perhaps be the most efficient.

---

<div class="post-metadata">

**Author:** ![wolfram161](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@wolfram161](https://forums.developer.nvidia.com/u/wolfram161)\
**Post date:** [June 11, 2020, 12:49am UTC](https://forums.developer.nvidia.com/t/agx-input-voltage/127222/3 "2020-06-11T00:49:43Z")

</div>

Yes, I see the point that the included charger is rated 19.5V. But according to this document  
[https://static5.arrow.com/pdfs/2018/12/12/12/22/1/565659/nvda\_/manual/jetson\_agx\_xavier\_thermal\_design\_guide\_v1.0.pdf](https://static5.arrow.com/pdfs/2018/12/12/12/22/1/565659/nvda_/manual/jetson_agx_xavier_thermal_design_guide_v1.0.pdf)  
“For optimal efficiency, a lower voltage power supply should be used. For example, a standard 9V power supply provides better efficiency over a 19V one. As the input voltage increases from 9V up to 19V the module  
operating efficiency will drop off.”  
So which one, 9V or 19V is right ?

---

<div class="post-metadata">

**Author:** ![linuxdev](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/linuxdev/32/10243_2.png) [@linuxdev](https://forums.developer.nvidia.com/u/linuxdev)\
**Post date:** [June 11, 2020, 7:21pm UTC](https://forums.developer.nvidia.com/t/agx-input-voltage/127222/4 "2020-06-11T19:21:55Z")

</div>

I could not give a definitive answer. However, if you really needed to know, do you have a bench supply capable of working with voltages from 9V to 19V? You might try comparing both voltages with a known load which matches your expected load. NVIDIA may have a document on efficiencies in that range, but I have not seen it, and if there is information on this, then I suspect it isn’t a large difference.

---

<div class="post-metadata">

**Author:** ![TomNVIDIA](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/tomnvidia/32/14181_2.png) [@TomNVIDIA](https://forums.developer.nvidia.com/u/TomNVIDIA)\
**Post date:** [October 18, 2021, 6:22pm UTC](https://forums.developer.nvidia.com/t/agx-input-voltage/127222/5 "2021-10-18T18:22:26Z")

</div>

Closed on October 18, 2021, 6:22pm UTC


