An issue where only a black screen appears after installing Jetpack 5.1.2 using sdk manager in AGX Orin

Please provide the following info (tick the boxes after creating this topic):
Software Version
DRIVE OS 6.0.6
DRIVE OS 6.0.5
DRIVE OS 6.0.4 (rev. 1)
DRIVE OS 6.0.4 SDK
other

Target Operating System
[v] Linux
QNX
other

Hardware Platform
DRIVE AGX Orin Developer Kit (940-63710-0010-300)
DRIVE AGX Orin Developer Kit (940-63710-0010-200)
DRIVE AGX Orin Developer Kit (940-63710-0010-100)
DRIVE AGX Orin Developer Kit (940-63710-0010-D00)
DRIVE AGX Orin Developer Kit (940-63710-0010-C00)
[v] DRIVE AGX Orin Developer Kit (not sure its number)
other

SDK Manager Version
[v] 1.9.3.10904
other

Host Machine Version
[v] native Ubuntu Linux 20.04 Host installed with SDK Manager
native Ubuntu Linux 20.04 Host installed with DRIVE OS Docker Containers
native Ubuntu Linux 18.04 Host installed with DRIVE OS Docker Containers
other

An issue where only a black screen appears after installing Jetpack 5.1.2 using sdk manager in AGX Orin.

I’m now suspecting that the situation stays in recovery mode . However, I don’t know how to solve this situation, so I’m posting on the forum. Please confirm.

[image]
SDKM_logs_JetPack_5.1.2_Linux_for_Jetson_AGX_Orin_modules_2023-08-07_13-14-39.zip (171.3 KB)

Process :

1.Connect micro USB to Bus 003 Device 032: ID 0955:7223 NVIDIA Corp. Check APX

  1. I installed Jetpack 5.1.2 on my AGX Orin via sdk manager.

  2. Check the installation success message in the log

  3. When AGX Orin is rebooted, only a black screen is displayed

Moving to Jetson AGX Orin forum for better support.

i will move it, thanks!

Closed as this is duplicated with An issue where only a black screen appears after installing Jetpack 5.1.2 using sdk manager in AGX Orin - Jetson & Embedded Systems / Jetson AGX Orin - NVIDIA Developer Forums