Aptina Image Sensor Board working with Jetson TK1 ?

Do the Aptina Image Sensor Boards from
http://www.ti.com/devnet/docs/catalog/thirdpartydevtoolfolder.tsp?actionPerformed=productFolder&productId=14720
work also with the Jetson TK1 ?
Is there some sort of driver for the Aptina board so that I get the image buffer (and can set all camera parameters) ?
If not working, is there some alternative image sensor board (e.g. from Sony) which we could use ?
Note we only use the sensor, we don’t use an objective.

Hi HannesF99,

Do the Aptina Image Sensor Boards from
http://www.ti.com/devnet/docs/catalog/thirdpartydevtoolfolder.tsp?actionPerformed=productFolder&productId=14720
work also with the Jetson TK1

→ NO

Is there some sort of driver for the Aptina board so that I get the image buffer (and can set all camera parameters) ?
If not working, is there some alternative image sensor board (e.g. from Sony) which we could use ?

→ Please refer to below wiki link:
http://elinux.org/Jetson/Cameras

Thanks