Auvidea J120 with Jetson TX2 (GPIO use I2S port)

Hi All,
I post here to know if possible to use Port I2S (J16) of J20 (rev.7) Auvidea Carrier board to Port output function.
Details: I want use to control 4 leds at output in c++ program,
If you are answer and lign of code to implement these ports.
In datasheet they give GPIO names :

  • GPIO3_PBB.00
  • GPIO3_PB.01
  • GPIO3_PB.03
  • GPIO3_PB.00