Basler Camera + Orin AGX Dev Kit

[jvitordm]

Hi there!

I’ve just received my Orin AGX Developer Kit and was trying to use it with a Basler camera (Basler dart daA3840-45uc (S-Mount) - Area Scan Camera), without any success to the moment (trying with this tutorial: Jetson AI Fundamentals - S3E1 - Hello AI World Setup - YouTube)

Is it possible to use such a camera?

Some additional comments: I was able to install the Pylon software and connect the camera, but not the pypylon python library… (I’m not sure it works considering the ubuntu arm64 OS installed)

Thanks for any help in advance!

[Honey_Patouceul]

You may try :

Streaming MIPI-CSI over RTSP stream

You may try building : in order to get your camera into gstreamer framework. If your camera is supported, you would be able to display with: gst-launch-1.0 -v pylonsrc ! videoconvert ! xvimagesink and stream with: ./test-launch "pylonsrc ! nvvidconv ! video/x-raw(memory:NVMM),width=1920, height=1080, framerate=30/1 ! nvv4l2h265enc maxperf-enable=1 ! h265parse ! rtph265pay name=pay0"