device info： Ethernet controller: Mellanox Technologies MT43244 BlueField-3 integrated ConnectX-7 network controlle r (rev 01)
[PN] Part number: 900-9D3B6-00SC-EA0
[EC] Engineering changes: A4
[V2] Vendor specific: 900-9D3B6-00SC-EA0
[SN] Serial number: MT2416X01863
[V3] Vendor specific: b65681d44c05ef1180009c63c070d1e6
[VA] Vendor specific: MLX:MN=MLNX:CSKU=V2:UUID=V3:PCI=V0:MODL=D3B6
[V0] Vendor specific: PCIeGen5 x16
[VU] Vendor specific: MT2416X01863MLNXS0D0F0
[RV] Reserved: checksum good, 1 byte(s) reserved
mlx5_core 0000:c1:00.1: firmware version: 32.45.1020
OS: Rocky9.4
doca-host：3.0.0 installed ok
BF-bundle installfailed。
then，after reboot，driver load failed，
errorinfo：
[ 4.379060] mlx5_core 0000:c1:00.0: firmware version: 32.45.1020
[ 4.379095] mlx5_core 0000:c1:00.0: 63.008 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x8 link at 0000:ae:02.0 (capable of 504.112 Gb/s with 32.0 GT/s PCIe x16 link)
[ 24.379229] mlx5_core 0000:c1:00.0: wait_fw_init:380:(pid 407): Waiting for FW pre-initializing, timeout abort in 100s (0x87010000)
[ 44.383227] mlx5_core 0000:c1:00.0: wait_fw_init:380:(pid 407): Waiting for FW pre-initializing, timeout abort in 79s (0x87010000)
[ 64.387224] mlx5_core 0000:c1:00.0: wait_fw_init:380:(pid 407): Waiting for FW pre-initializing, timeout abort in 59s (0x87010000)
[ 84.391224] mlx5_core 0000:c1:00.0: wait_fw_init:380:(pid 407): Waiting for FW pre-initializing, timeout abort in 39s (0x87010000)
[ 104.395222] mlx5_core 0000:c1:00.0: wait_fw_init:380:(pid 407): Waiting for FW pre-initializing, timeout abort in 19s (0x87010000)
[ 124.379221] mlx5_core 0000:c1:00.0: wait_fw_init:370:(pid 407): Firmware over 120000 MS in pre-initializing state, aborting
[ 124.379249] mlx5_core 0000:c1:00.0: probe_one:2506:(pid 407): mlx5_init_one failed with error code -110
[ 124.383480] mlx5_core: probe of 0000:c1:00.0 failed with error -110
Have you power cycle the server (cold boot) and re-image the card (Ie: bfb-install) → BF-bundle install failed