Dear NVIDIA Supporter, I used a backup tool to back up an image and then recovered it to a custom board with an NVMe SSD. However, I encountered a boot problem with the following messages: `>>Start HTTP Boot over IPv6. Error: Could not retrieve NBP file size from HTTP server. Error: Unexpected …

[image] yen_chou: Is there any method to skip or disable the Ethernet boot in UEFI? Refer this link for changing boot order via efibootmgr method: [image] Boot order change after restore from orin A to orin B Jetson Orin NX Hi 1adamward1, Are you using…

Hi yen_chou, Please also check if NVMe SSD is still the first boot device in boot order of UEFI menu. You can press ESC during boot to enter into UEFI menu

Hi Nagesh_accord, Thank you for you reply, but the issue still persists. Here are the steps I followed: 1.Set the boot order on machine A using efibootmgr: ubuntu@tegra-ubuntu:~$ sudo efibootmgr -o 0001,0004,0003,0002,0005,0000,0006,0007 BootCurrent: 0001 Timeout: 0 seconds BootOrder: 0001,0004,…

Hi KevinFFF, Thank you for your reply. Yes, I’ve confirmed that the NVMe SSD is still set as the first boot device. The issue occurs after performing the backup and restore process between the two machines. The detailed steps are provided in my previous reply to Nagesh_accord. Is there any metho…

[image] yen_chou: Is there any method to lock or preserve the boot order settings in the boot menu? Try changing the boot order on the same machine and restart that machine and check the boot order. It will be persistent and settings are restored across the boot.

[image] yen_chou: Is there any method to lock or preserve the boot order settings in the boot menu? Boot-order should be predefined in L4TConfiguration.dtsbefore flash. [image] yen_chou: As you can see, the boot order on machine B is different from machine A. What’s the boot order on …

Hi Nagesh_accord, Changing the boot order on the same machine works fine, but after restoring the image to another machine, the boot order gets changed. I would like to resolve the issue where a backup from machine A and restore to machine B results in a different boot order.

[image] yen_chou: l4t_backup_restor 1.Boot order should be predefined in L4TConfiguration.dts before flashing. In L4TConfiguration.dts, the boot order is defined as follows: gNVIDIATokenSpaceGuid { DefaultBootPriority { data = "usb,nvme,emmc,sd,ufs"; locked; }; }; H…

Boot Issue After Image Recovery on NVMe SSD Orin Nano Custom Board Jetpack6.1

Robotics & Edge Computing Jetson Systems Jetson Orin Nano

KevinFFF April 11, 2025, 8:28am 12

We can reproduce the similar behavior as yours.
I’ve checked this with internal and we think the current result is expected.
Please refer to L4t_backup_restore restore backup long boot up times - #6 by lhoang for details.

How to include custom boot logo in a single backup/restore cycle on JetPack 6.2 (SSD)

Topic		Replies	Views
Boot order change after restore from orin A to orin B Jetson Orin NX tensorrt , boot , reflash , ubuntu	5	767	January 16, 2024
Bootloader dropping to shell or network boot after flashing a backed up image Jetson Orin Nano reboot	10	837	April 5, 2024
Boot Order Issue on Orin Nano Jetson Orin Nano uefi	3	512	September 5, 2024
Jetson Orin Nano massflush And Boot Jetson Orin Nano flash	5	268	April 9, 2025
Orin nx boot order changer after restore system Jetson Orin NX boot , board-design	13	1722	May 5, 2023
64G AGX Orin boot Order Getting Reset (JetPack 5.1.1 - L4T r35.3.1) Jetson AGX Orin boot	11	1217	November 29, 2023
ORIN NX恢复镜像后无法启动 Jetson Orin NX boot	6	240	July 16, 2025
L4t_backup_restore restore backup long boot up times Jetson Orin NX clone	5	344	March 25, 2025
Failed oder boot UEFI when backup image OS from SSD of Orin-nx Jetson Orin NX boot	3	175	July 29, 2024
How to modify the boot order on orin nx? Jetson Orin NX boot , board-design	32	5064	May 18, 2023

Boot Issue After Image Recovery on NVMe SSD Orin Nano Custom Board Jetpack6.1

Related topics