NVIDIA Developer Forums

Camera 1V2 Rail Question

Robotics & Edge Computing Jetson & Embedded Systems Jetson TX1

JerryChang February 6, 2017, 8:20am 3

hello Atrer,

both regulator@209 (en_vdd_cam_1v2) and regulator@211 (en_vdd_cam_1v2_alt) were defined as 1.2V
you should check your camera device tree to specify the regulator.
thanks

Topic		Replies	Views	Activity
how to enable en-vdd-cam-1v2 Jetson TX1	3	870	October 18, 2021
r28.1 what happened to en-vdd-cam-1v2-alt? Jetson TX1	7	646	October 18, 2021
Device tree properties for camera driver Jetson AGX Xavier	3	1162	October 18, 2021
How can use linux command set on or off the "DVDD_CAM_1V8" at TX2? Jetson TX2	2	551	October 18, 2021
Need help about camera regulators Jetson AGX Orin camera , hw , power , question , level3	37	131	May 21, 2025
Voltage regulator setup in jetson tx2 Jetson TX2 camera	12	1816	December 3, 2020
camera_common_regulator_get returns an error and defers the probe Jetson TX2	2	1635	October 18, 2021
Error: camera_common_regulator_get vif ERR: ffffffffffffffed Jetson Xavier NX camera	2	461	November 17, 2021
Question for gpio regulator (regulator-fixed) Jetson AGX Xavier gpio , device-tree	11	2957	October 18, 2021
Enable 1.8 V power supply on Camera Expansion Connector Jetson TX1	3	1111	October 18, 2021