Camera injection with Solectrix and Sekonix

[incognito]

I am using NVIDIA DRIVE AGX Xavier for injecting virtual images from a simulation via a camera injection card from Solectrix(proFRAME 3.0). The virtual camera i am trying to emulate is Sekonix SF3325-100.

Configuration :

Solectrix proFRAME3.0 card is integrated in the simulation PC via PCIe card. It has 4 GMSL output ports and the firmware is configured in the replay mode. One of the output ports is connected to DRIVE AGX via the Fakra cable.

For this camera injection, I need a camera initialization sequence between DRIVE AGX and Sekonix camera. Did anyone already work on one such topic and can provide me a hint on how to get this information ?

Please provide the following info (check/uncheck the boxes after creating this topic):
Software Version
DRIVE OS Linux 5.2.6
DRIVE OS Linux 5.2.6 and DriveWorks 4.0
DRIVE OS Linux 5.2.0
DRIVE OS Linux 5.2.0 and DriveWorks 3.5
NVIDIA DRIVE™ Software 10.0 (Linux)
NVIDIA DRIVE™ Software 9.0 (Linux)
other DRIVE OS version
other - 5.1.0.2-15191604

Target Operating System
Linux
QNX
other

Hardware Platform
NVIDIA DRIVE™ AGX Xavier DevKit (E3550)
NVIDIA DRIVE™ AGX Pegasus DevKit (E3550)
other

SDK Manager Version
1.9.1.10844
other

Host Machine Version
native Ubuntu 18.04
other - Ubuntu 16.04

[VickNV]

Thank you for sharing your setup and requirements. However, I must clarify that the specific configuration you mentioned, involving the Solectrix proFRAME 3.0 card and the Sekonix SF3325-100 camera, has not been verified or aren’t supported by nvidia. I would leave it to other developers.

Additionally, it’s worth noting that the version of DRIVE OS you mentioned (5.1.0.2) is quite old and not a devzone release. I strongly advise working with the latest version, such as 5.2.6, as it incorporates various improvements and bug fixes that can potentially save you time and provide a more stable development environment.