Camera streaming issue on CSI0 and CSI1 simultaneously

Autonomous Machines Jetson & Embedded Systems Jetson Orin NX
1

Hello,

In our custom carrier board we have connect two 2 lane camera on CSI0 and CSI1. Individual camera is streaming successful one camera at a time it . But when I start streaming of both camera one by one on different terminal, both camera’s streaming stops after 3-4 sec and got error as [RCE] ERROR: camera-ip/vi5/vi5.c:745 [vi5_handle_eof] "General error queue is out of sync with frame queue. ts=166183928928 sof_ts=166201270880 gerror_code=2 gerror_data=400060 notify_bits=40000002 and both camera streaming fail.

I have tried to boost clock and try low frame rate but still facing same issue.

Is there a way to fix this?

Thanks

3

Apply the attached RCE firmware for it.

camera-rtcpu-t234-rce.img.r35.4.1.asynchronous (519.3 KB)
camera-rtcpu-t234-rce.img.r35.5.asynchronous (519.3 KB)

4

can RCE firmware be updated at run time ? can you please share steps to update it.

5

Hi, you can refer this post:

7

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.