Can jetson platform realize ZACwire single line communication?

[tiantianluxin]

Can jetson platform realize ZACwire single line communication?

[ShaneCCC]

Does it 1-wire interface? Below reference may help.

Dallas one wire device tree configuration with ds18b20

Hi, I’m trying to configure the 1-wire driver on the TX1 so I can use the ds18b20 temp sensor on gpio63. I referenced linux/Documentation//devicetree/bindings/w1/w1-gpio.txt which states that the only two required properties for the device tree are compatible and gpios. I have added the following to my device tree: onewire@0 { compatible = "w1-gpio"; gpios = <0x78 0x3F 0>; }; I have connected the ds18b20 data line to GPIO63 through a 4.7k pullup, power to 3.3V and gnd to gnd. I’ve also r…