Please provide the following info (tick the boxes after creating this topic): Software Version
DRIVE OS 6.0.5
DRIVE OS 6.0.4 (rev. 1)
DRIVE OS 6.0.4 SDK
Target Operating System
DRIVE AGX Orin Developer Kit (940-63710-0010-D00)
DRIVE AGX Orin Developer Kit (940-63710-0010-C00)
DRIVE AGX Orin Developer Kit (not sure its number)
other AGX Orin 940-63710-0010-200
SDK Manager Version
Host Machine Version
native Ubuntu Linux 20.04 Host installed with SDK Manager
native Ubuntu Linux 20.04 Host installed with DRIVE OS Docker Containers
native Ubuntu Linux 18.04 Host installed with DRIVE OS Docker Containers
SDK manager tries to flash the connected Drive AGX Orin and it fails between the 60 - 80 % mark.
I tried it multiple times but it fails at different stages during flash. I used the original USB cables. Also on different Ports. I use a laptop so the USB controller for the USB Type C connection and debug port are most likely the same.
Thank you for checking the forum and trying the suggested workaround. If using a USB 2.0 cable doesn’t solve the issue, please provide the host dmesg log and target flashing kernel log as described in the previous message. We’ll take a look and see how we can assist you further.
Just some info’s for everyone to replicate: I used the crappiest USB A to C cable I could find from an old phone charger. Then the flash took like 45 min to complete and the SDK Manager prompt you that it takes longer than expected - just hit continue.
@VickNV Here is the log of the succeeded flash.
I’ll hope you find the bug soon, had already nightmare flashbacks from the AGX Xavier flash process.