Hi，I am unable to upgrade the firmware. The method and error information are as follows:
Could you help me to resolve it？ thank you.
- The error log generated during flashing using flash.sh is as follows::
[ 0.1425 ] tegrarcm_v2 --new_session --chip 0x23 0 --uid --download bct_br br_bct_BR.bct --download mb1 mb1_t234_prod_aligned_sigheader.bin.encrypt --download psc_bl1 psc_bl1_t234_prod_aligned_sigheader.bin.encrypt --download bct_mb1 mb1_bct_MB1_sigheader.bct.encrypt
[ 0.1431 ] BR_CID: 0x80012344705DD3C5240000000AFD80C0
[ 0.1440 ] Sending bct_br
[ 0.1441 ] ERROR: might be timeout in USB write.
Error: Return value 3
Command tegrarcm_v2 --new_session --chip 0x23 0 --uid --download bct_br br_bct_BR.bct --download mb1 mb1_t234_prod_aligned_sigheader.bin.encrypt --download psc_bl1 psc_bl1_t234_prod_aligned_sigheader.bin.encrypt --download bct_mb1 mb1_bct_MB1_sigheader.bct.encrypt
Reading board information failed.
2. The error log from the firmware flashing via SDK Manager is attached below.
[SDKM_logs_JetPack_6.0_(rev._1)_Linux_for_Jetson_AGX_Orin_modules_2024-05-15_21-39-25.zip|attachment](upload://nBdvYoLmn3XEFr2qkkJQ86gUuia.zip) (275.0 KB)