Dear Support, After I have flashed the JetPack4.3 on my Jetson TX2, the CSI camera is working through the following command: gst-launch-1.0 nvarguscamerasrc ! nvvidconv ! xvimagesink My robot launch file which publishes the CSI camera node was working for ubuntu 16.04 of JetPack3.3 but not f…

Move to below topic. Close this one. [image] How to launch CSI camera node in the ROS launch file in Ubuntu 18.04 Jetson TX2 Dear Support, After I have flashed the JetPack4.3 into my Jetson TX2, I have tried the following command to test my on-board CSI camera. It works. …

Cannot get the CSI camera node working anymore in the launch file on ubuntu 18.04

Autonomous Machines Jetson & Embedded Systems Jetson TX2

ShaneCCC March 18, 2020, 2:56am 4

Move to below topic. Close this one.