# Clock is behind / Hyperion Launcher does not work

**URL:** <https://forums.developer.nvidia.com/t/clock-is-behind-hyperion-launcher-does-not-work/69185>\
**Category:** DRIVE AGX Xavier General\
**Created:** [January 8, 2019, 12:36pm UTC](https://forums.developer.nvidia.com/t/clock-is-behind-hyperion-launcher-does-not-work/69185 "2019-01-08T12:36:34Z")\
**Posts on this page:** 10\
**Page:** 1

<div class="post-metadata">

**Author:** ![andreXavier](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@andreXavier](https://forums.developer.nvidia.com/u/andreXavier)\
**Post date:** [January 8, 2019, 12:36pm UTC](https://forums.developer.nvidia.com/t/clock-is-behind-hyperion-launcher-does-not-work/69185/1 "2019-01-08T12:36:34Z")

</div>

Hello,

I am currently trying to do my fist steps with the Nvidia Drive Development Platform Xavier. I am new to the system and ubuntu so i need some help from you.

I currently having two problems:

1. Cannot access the internet with my xavier plattform

When ubuntu has successfully booted and the chromium browser is opened, it says “my clock is behind”  
I should update date and time.  
Ubuntu says its the 24 Oct in 2002.  
This is set when using the Time&Date Settings Automatically from the internet. When switching to manually and editing the time, it switches shortly to the selected date and then back to the 24 of october. I also tried some npt commands and tried to set the hwclock but that didn’t work.

1. Besides that when I open the Hyperion Launcher and try to start the Drive AV or something different, the application closes and I just see the normal screen.

Other than that I would like to read some more about the Xavier, I tried to gain some over [NVIDIA DRIVE Documentation | NVIDIA Developer](https://developer.nvidia.com/drive/drive-early-access-developer-program-documentation)

but it always says Approval pending. Is there another way to get documentation for the Xavier?

Thank you!

---

<div class="post-metadata">

**Author:** ![SteveNV](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/stevenv/32/14043_2.png) [@SteveNV](https://forums.developer.nvidia.com/u/SteveNV)\
**Post date:** [January 13, 2019, 11:40pm UTC](https://forums.developer.nvidia.com/t/clock-is-behind-hyperion-launcher-does-not-work/69185/2 "2019-01-13T23:40:11Z")

</div>

> [@](#):
>
> Hello,
> 
> I am currently trying to do my fist steps with the Nvidia Drive Development Platform Xavier. I am new to the system and ubuntu so i need some help from you.
> 
> I currently having two problems:
> 
> 1. Cannot access the internet with my xavier plattform
> 
> When ubuntu has successfully booted and the chromium browser is opened, it says “my clock is behind”  
> I should update date and time.  
> Ubuntu says its the 24 Oct in 2002.  
> This is set when using the Time&Date Settings Automatically from the internet. When switching to manually and editing the time, it switches shortly to the selected date and then back to the 24 of october. I also tried some npt commands and tried to set the hwclock but that didn’t work.
> 
> 1. Besides that when I open the Hyperion Launcher and try to start the Drive AV or something different, the application closes and I just see the normal screen.
> 
> Other than that I would like to read some more about the Xavier, I tried to gain some over [https://developer.nvidia.com/drive/drive-early-access-developer-program-documentation](https://developer.nvidia.com/drive/drive-early-access-developer-program-documentation)
> 
> but it always says Approval pending. Is there another way to get documentation for the Xavier?
> 
> Thank you!

1. Did you connected E3556(CAN RTC and PPS module) module to CAN 6&4 port on DriveAGX harness cable?

2. When booting DRIVE AGX Development Platform; you will be greeted with the following UI automatically  
However, this UI will not work unless you have a full DRIVE Hyperion Development Kit. If you do not have a DRIVE Hyperion Development Kit, you may safely ignore and close this UI.

Regarding “Approval pending issue”, we will check and update it.

---

<div class="post-metadata">

**Author:** ![garywang](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/garywang/32/12970_2.png) [@garywang](https://forums.developer.nvidia.com/u/garywang)\
**Post date:** [January 14, 2019, 1:34am UTC](https://forums.developer.nvidia.com/t/clock-is-behind-hyperion-launcher-does-not-work/69185/3 "2019-01-14T01:34:21Z")

</div>

I suffered the same problem and use following steps with ptpd to workaround…

sudo service ntp stop  
sudo timedatectl set-ntp false  
sudo date +%Y%m%d -s “20190110”  
sudo date +%T -s “15:34:00”

---

<div class="post-metadata">

**Author:** ![andreXavier](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@andreXavier](https://forums.developer.nvidia.com/u/andreXavier)\
**Post date:** [January 14, 2019, 6:53am UTC](https://forums.developer.nvidia.com/t/clock-is-behind-hyperion-launcher-does-not-work/69185/4 "2019-01-14T06:53:48Z")

</div>

> [@mania91](#):
>
> > [@](#):
> >
> > Hello,
> > 
> > I am currently trying to do my fist steps with the Nvidia Drive Development Platform Xavier. I am new to the system and ubuntu so i need some help from you.
> > 
> > I currently having two problems:
> > 
> > 1. Cannot access the internet with my xavier plattform
> > 
> > When ubuntu has successfully booted and the chromium browser is opened, it says “my clock is behind”  
> > I should update date and time.  
> > Ubuntu says its the 24 Oct in 2002.  
> > This is set when using the Time&Date Settings Automatically from the internet. When switching to manually and editing the time, it switches shortly to the selected date and then back to the 24 of october. I also tried some npt commands and tried to set the hwclock but that didn’t work.
> > 
> > 1. Besides that when I open the Hyperion Launcher and try to start the Drive AV or something different, the application closes and I just see the normal screen.
> > 
> > Other than that I would like to read some more about the Xavier, I tried to gain some over [NVIDIA DRIVE Documentation | NVIDIA Developer](https://developer.nvidia.com/drive/drive-early-access-developer-program-documentation)
> > 
> > but it always says Approval pending. Is there another way to get documentation for the Xavier?
> > 
> > Thank you!
> 
> 1. Did you connected E3556(CAN RTC and PPS module) module to CAN 6&4 port on DriveAGX harness cable?
> 
> 2. When booting DRIVE AGX Development Platform; you will be greeted with the following UI automatically  
> However, this UI will not work unless you have a full DRIVE Hyperion Development Kit. If you do not have a DRIVE Hyperion Development Kit, you may safely ignore and close this UI.
> 
> Regarding “Approval pending issue”, we will check and update it.

Yes i connected the module to the CAN6 & 4. But it’s still not working.

Can i install the SDK from this site to the Xavier Platform?

> **[DRIVE Downloads](https://developer.nvidia.com/drive/downloads)**

Because when i open the installer on the host pc, the selectable platform to install the sdk is just the drive px2 and the px2 chaffeur.

Thank you.

@garywang  
thx for your workaround, I will test it

---

<div class="post-metadata">

**Author:** ![nunovxax9](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@nunovxax9](https://forums.developer.nvidia.com/u/nunovxax9)\
**Post date:** [January 14, 2019, 4:13pm UTC](https://forums.developer.nvidia.com/t/clock-is-behind-hyperion-launcher-does-not-work/69185/5 "2019-01-14T16:13:16Z")

</div>

I ran into the same problem. As workaround I had to kill the ptp4l and phc2sys processes (similar to what’s on a previous comment):

```
sudo killall ptp4l
sudo killall phc2sys
sudo service ntp stop
sudo timedatectl set-ntp false
sudo ntpdate pool.ntp.org

```

---

<div class="post-metadata">

**Author:** ![garywang](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/garywang/32/12970_2.png) [@garywang](https://forums.developer.nvidia.com/u/garywang)\
**Post date:** [January 15, 2019, 1:27am UTC](https://forums.developer.nvidia.com/t/clock-is-behind-hyperion-launcher-does-not-work/69185/6 "2019-01-15T01:27:33Z")

</div>

I created NVONLIVE bug #2485258 [https://partners.nvidia.com/bug/viewbug/2485258](https://partners.nvidia.com/bug/viewbug/2485258) for sighting.

---

<div class="post-metadata">

**Author:** ![nunovxax9](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@nunovxax9](https://forums.developer.nvidia.com/u/nunovxax9)\
**Post date:** [January 25, 2019, 2:13pm UTC](https://forums.developer.nvidia.com/t/clock-is-behind-hyperion-launcher-does-not-work/69185/7 "2019-01-25T14:13:03Z")

</div>

I’m unable to access that bug report. Any update on this?

---

<div class="post-metadata">

**Author:** ![FabianWeise](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/fabianweise/32/14043_2.png) [@FabianWeise](https://forums.developer.nvidia.com/u/FabianWeise)\
**Post date:** [January 25, 2019, 7:45pm UTC](https://forums.developer.nvidia.com/t/clock-is-behind-hyperion-launcher-does-not-work/69185/8 "2019-01-25T19:45:49Z")

</div>

Hi,

we are on it.

- Fabian

---

<div class="post-metadata">

**Author:** ![SteveNV](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/stevenv/32/14043_2.png) [@SteveNV](https://forums.developer.nvidia.com/u/SteveNV)\
**Post date:** [March 5, 2019, 7:29am UTC](https://forums.developer.nvidia.com/t/clock-is-behind-hyperion-launcher-does-not-work/69185/9 "2019-03-05T07:29:02Z")

</div>

Dear nunovxax9,

Please try this workaround. You might have to run these commands as “sudo.”

# First, go to [https://www.epochconverter.com](https://www.epochconverter.com) and convert any arbitrary human readable date/time to epoch time format - this will be a decimal value so be sure to convert it to hex

# On Aurix shell

## Check current epoch time

date

## Set epoch time

date 0x[epoch in hex format]

## Confirm the time you set above

date

## Enable gPTP

gptpon

# On Tegra shell

## Read system time

date

## Take down br0.200

ifconfig br0.200 down

## Create a new VLAN to communicate with Aurix

ip link add link eth0 name eth0.200 type vlan id 200

## Set ip addr of eth0.200 (x.x.x.28 if Tegra A, x.x.x.29 if Tegra B)

ifconfig eth0.200 10.42.0.28  
ifconfig eth0.200 up

## Follow the normal procedure

cd ~/drive-t186ref-linux/samples/nvavb/daemons  
timedatectl set-ntp 0  
./phc2sys -s /dev/ptp0 -w -S 1.0 -O 0 &  
./ptp4l -f ./gPTP\_slave.cfg -p /dev/ptp0 -i eth0.200 -m -l 7

## Verify system time is synced (might need a separate terminal)

date

---

<div class="post-metadata">

**Author:** ![TomNVIDIA](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/tomnvidia/32/14181_2.png) [@TomNVIDIA](https://forums.developer.nvidia.com/u/TomNVIDIA)\
**Post date:** [October 12, 2021, 8:05pm UTC](https://forums.developer.nvidia.com/t/clock-is-behind-hyperion-launcher-does-not-work/69185/10 "2021-10-12T20:05:42Z")

</div>

Closed on October 12, 2021, 8:05pm UTC


