Hello @JerryChang , While we are trying to debug our other issue. I was able to get a clean SOM and test fuse burning, So far I have run the odmfuse burning process with the --test flag to see what it might result in. these are the commands and results (some folder paths removed): sudo ./odmfuse.s…

Here we go, using L4t 32.6.1 I have everything working here. My changes to 32.6.1 to get a working flash: Compile a new kernel image, with the new cipher settings added to the config: Concerns about fuse burning on TX2 - #14 by nvidiadude replace the one in kernel folder with my new kernel Ima…

Concerns about fuse burning on TX2

Robotics & Edge Computing Jetson & Embedded Systems Jetson TX2

JerryChang July 29, 2021, 5:50am 3

please also check Jetson TX2 not booting after ROOTFS_ENC=1 flash - #23 by JerryChang for reference…

Topic		Replies	Views
How to verify that secure boot with kernel encryption and disc encryption is enabled in Jetson TX2? Jetson TX2 boot , security , nvbugs	19	1424	September 13, 2023
Secure Boot TX2i Jetson TX2 security	4	1329	October 18, 2021
Jetson TX2 not booting after ROOTFS_ENC=1 flash Jetson TX2 boot , security , nvbugs	20	3339	October 3, 2021
Unable to burn fuses (dev kit) / no more output (serial/hdmi) / bricked? Jetson AGX Xavier security , nvbugs	93	6563	October 18, 2021
Secure Boot odmfuse programming step fail on 32.2.1 Jetson TX2	20	2685	October 18, 2021
Fuse burning failure after a successful KEK0 Jetson TX2 nvbugs	11	1462	October 18, 2021
How to burn ODM fuse bits (TX2)? Jetson TX2 security	30	2648	October 18, 2021
Postmortem: Jetson Xavier AGX will not get past Boot ROM after burning PKC+SBK+KEK256 Jetson AGX Xavier security	9	1930	April 20, 2022
The device can't start up after flashing one disk encryption image Jetson Xavier NX security	40	2775	March 2, 2022
Unable to boot fused Jetson Orin Nano despite flashing process appearing to succeed Jetson Orin Nano security	27	161	July 21, 2025

Concerns about fuse burning on TX2

Related topics