Cross-compiling the samples onto the DRIVE platform

[VickNV]

Every HSD connector (in Table 3-11. Dual GbE Dongle Ethernet Connection Mapping) with RJ45 channel A/B connection works on my side. Have you plugged a power plug into your Dual GbE dongle? Please also refer to https://developer.nvidia.com/DRIVE/secure/docs/DRIVE_AGX_Developer_Kit_Hardware_Quick_Start_Guide.pdf.

Has internet ever worked on this system before? Could you check if something wrong outside of the system and dongle? Ethernet cable? DHCP server?

Please also check if below topics can help on your case.

Ethernet connection for Drive Agx

Hello, I want to connect Drive Agx XavierA to Internet but there is nothing under network list(version:Drive Software 9.0 Linux) Following HARDWARE QUICK START GUIDE https://developer.nvidia.com/drive/documentation, I connected the Dual GbE Dongle to the Black 1&2 1 Gbps 802.3bp Ethernet Port for internet access but I still got nothing. The dongle is blinking so I suppose that the hardware should be working. Could you give me some advice? Thank you.

No internet access when using different DRIVE SW Versions

Hi all, we received our AGX Development Kit with DRIVE Software 8.0 and a working internet connection on Xavier A and B. We followed the installation notes and pre-flashed PCIe switch (use case 4.0). Afterwards we flashed Xavier A to version 9.0 (Xavier B is still version 8.0). The flashing procedure finished successfully. Since then we have no internet access on Xavier B which uses SW 8.0. However, the connection on Xavier A (SW 9.0) is still working. The command ifconfig shows that no ip addr…