CSI-2 Short Packets details -- Print out

Autonomous Machines Jetson & Embedded Systems Jetson TX2
1

Hi All,

Need to print the short packets data. So that I can get the ideas as “Normal Start of Frame packet” is reached. Or “Calibration Start of Frame packet” is reached.

The main doubt is whether “Calibration Start of Frame Packet” is reached to Nvcsi side or not. Need to confirm this detail.

-Thanks.

2

To enable trace for more information.

https://elinux.org/Jetson_TX2/28.1_Camera_BringUp

3

After booting the Linux OS, we need to enable the trace operation. Before enable the trace, both Tx and Rx can send the Calibration sof packet or normal sof packet. We may miss this information. Since transmission of sof packet, may take the less time.

If we have the facility the print the short packets, the we may get the information.
Looking for this information.

-Thanks.