I’ve been attempting to install CUDA in openSUSE 11.1 (64 bit) for some time now, but to no avail and would really appreciate any help, I have the following set up:
Card: GeForce 9500 GT
I’m using the default kernel for the driver installed through Yast; I attempted installing the driver manually, but sax2 ended up not being able to start and I was without any X, so I reverted to the former. I’ve noticed that at least a few people on this site have used a work around by adding uppermem, vmalloc and pci to the grub boot file (menu.lst); I tried this too:
root (hd0,0) uppermem 524288 kernel /vmlinuz-22.214.171.124-0.1-default root=/dev/md0 resume=/dev/disk/by-id/ata-ST3500320AS_9QM4X7MA-part3 splash=silent showopts vga=0x31a vmalloc=256MB pci=nommconf initrd /initrd-126.96.36.199-0.1-default
But my deviceQuery still gives the following output:
CUDA Device Query (Runtime API) version (CUDART static linking) There is no device supporting CUDA. Device 0: "Device Emulation (CPU)" CUDA Capability Major revision number: 9999 CUDA Capability Minor revision number: 9999 Total amount of global memory: 4294967295 bytes Number of multiprocessors: 16 Number of cores: 128 Total amount of constant memory: 65536 bytes Total amount of shared memory per block: 16384 bytes Total number of registers available per block: 8192 Warp size: 1 Maximum number of threads per block: 512 Maximum sizes of each dimension of a block: 512 x 512 x 64 Maximum sizes of each dimension of a grid: 65535 x 65535 x 1 Maximum memory pitch: 262144 bytes Texture alignment: 256 bytes Clock rate: 1.35 GHz Concurrent copy and execution: No Run time limit on kernels: No Integrated: Yes Support host page-locked memory mapping: Yes Compute mode: Default (multiple host threads can use this device simultaneously) Test PASSED
I had CUDA working on XP before I decided to switch to Linux, so this is fairly frustrating… any help would be wonderful, thanks!