Hi Team, I have Jetson Nano and Jetson Xavier NX Custom Carrier board , we able to boot successfully boot in NaNo SOM module , but at the time of NX SOM booting it continuously reboot it self. can any one guide me on that . attaching logs with and without SD card inserted on Xavier NX SOM modul…

thank you for your feedback , we disconnect POWER_EN signal connection from MCU and provide Hardware High signal with RC delay . and now NX boot successfully . i think that low pulse give by MCU logic .

Custom Carrier board Reboot issue for Jetson Xavier NX

Autonomous Machines Jetson & Embedded Systems Jetson Xavier NX

WayneWWW November 24, 2021, 6:59am 5

@JerryChang

This thread has another duplciated post here. I see no difference between these two. Should check from hardware design first.