# DCF Tracker REFUSING to work while using low level library

**URL:** <https://forums.developer.nvidia.com/t/dcf-tracker-refusing-to-work-while-using-low-level-library/141411>\
**Category:** DeepStream SDK\
**Created:** [July 10, 2020, 8:14pm UTC](https://forums.developer.nvidia.com/t/dcf-tracker-refusing-to-work-while-using-low-level-library/141411 "2020-07-10T20:14:40Z")\
**Posts on this page:** 1\
**Showing post:** 6

<div class="post-metadata">

**Author:** ![pshin](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/pshin/32/15508_2.png) [@pshin](https://forums.developer.nvidia.com/u/pshin)\
**Post date:** [July 21, 2020, 4:15pm UTC](https://forums.developer.nvidia.com/t/dcf-tracker-refusing-to-work-while-using-low-level-library/141411/6 "2020-07-21T16:15:52Z")

</div>

Hello moezruo6,

For the very first frame, it should be ` _nvFrame.reset = true;` , afterwards set ` _nvFrame.reset = false;`

I noticed `_nvFrame.objectsIn.detectionDone = false;` There is a difference in KLT and NvDCF in handling this flag. In KLT, it doesn’t check this flag, and if there’s bbox from detector, it will use it. But, NvDCF checks this flag. So, if you provide bbox to initialize the tracker, then you should set this `_nvFrame.objectsIn.detectionDone = true;` For example, if you run detector at every other frame, then this flag value should also alternate between true and false.  
If you run detector at every frame (which is the case in your sample code), then this flag should always be `true`.

Please try and post your observation again.

---

_[View the full topic](https://forums.developer.nvidia.com/t/dcf-tracker-refusing-to-work-while-using-low-level-library/141411)._
