# Disk speed

**URL:** <https://forums.developer.nvidia.com/t/disk-speed/260217>\
**Category:** Jetson AGX Orin\
**Tags:** hw\
**Created:** [July 18, 2023, 2:15pm UTC](https://forums.developer.nvidia.com/t/disk-speed/260217 "2023-07-18T14:15:49Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![saif.zamer](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@saif.zamer](https://forums.developer.nvidia.com/u/saif.zamer)\
**Post date:** [July 18, 2023, 2:15pm UTC](https://forums.developer.nvidia.com/t/disk-speed/260217/1 "2023-07-18T14:15:49Z")

</div>

hey all,  
i would like to know if any information about the write speeds on the orin

---

<div class="post-metadata">

**Author:** ![fchkjwlsq](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/fchkjwlsq/32/227280_2.png) [@fchkjwlsq](https://forums.developer.nvidia.com/u/fchkjwlsq)\
**Post date:** [July 18, 2023, 6:40pm UTC](https://forums.developer.nvidia.com/t/disk-speed/260217/2 "2023-07-18T18:40:34Z")

</div>

It depends.  
The internal EMMC has a linear transfer speed of about 100 MB/s (MBytes). Fast EMMCs can go up to 400 MB/s when using HS400 transfer mode (which Orin doesn’t support).  
A fast PCIe x4 Gen4 M.2 NVMe SSD can go up to 3000 MB/s.  
SATA SSDs are limited to 550 MB/s.  
Really fast mechanical hard disks can go up to 200 MB/s.

These are approximate linear speeds (ballpark numbers). Real world performance is significantly lower.

---

<div class="post-metadata">

**Author:** ![saif.zamer](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@saif.zamer](https://forums.developer.nvidia.com/u/saif.zamer)\
**Post date:** [July 19, 2023, 11:25am UTC](https://forums.developer.nvidia.com/t/disk-speed/260217/3 "2023-07-19T11:25:10Z")

</div>

because my program writes frequently on the disk (trying to capture and save 30 fps), would adding an external ssd and writing the images onto it be faster? (we bought a 970 evo plus ssd)

---

<div class="post-metadata">

**Author:** ![fchkjwlsq](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/fchkjwlsq/32/227280_2.png) [@fchkjwlsq](https://forums.developer.nvidia.com/u/fchkjwlsq)\
**Post date:** [July 19, 2023, 11:45am UTC](https://forums.developer.nvidia.com/t/disk-speed/260217/4 "2023-07-19T11:45:00Z")

</div>

If (and only if) the SSD is connected directly(!) to the PCIe of the Jetson Module via all four lanes you should see a very noticable improvement. Some carrier boards use only two lanes, which cuts the maximum speed in half.

Using an USB-NVMe bridge will give worse results - don’t do this.

Remember: Proper cooling will prevent the SSD from slowing down during operation and extend its lifespan.

---

<div class="post-metadata">

**Author:** ![saif.zamer](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@saif.zamer](https://forums.developer.nvidia.com/u/saif.zamer)\
**Post date:** [July 19, 2023, 12:48pm UTC](https://forums.developer.nvidia.com/t/disk-speed/260217/5 "2023-07-19T12:48:55Z")

</div>

we’ll attach cooling and use a gen4 pcie ssd, i will report back if any improvement has occured

---

<div class="post-metadata">

**Author:** ![system](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/system/32/68080_2.png) [@system](https://forums.developer.nvidia.com/u/system)\
**Post date:** [August 2, 2023, 12:49pm UTC](https://forums.developer.nvidia.com/t/disk-speed/260217/6 "2023-08-02T12:49:24Z")

</div>

Closed on August 2, 2023, 12:49pm UTC

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.
