Does ConnectX-3 support Amphenol's QSFP+  transceiver?

Infrastructure & Networking Adapters And Cables InfiniBand/VPI Adapter Cards
#1

I want to get cable info, all data of which aren’t correct, when I plug AMPHENOL’s QSFP+ transceiver in.

But when I plug MOLEX’s QSFP transceiver in, I can get the correct info.

Send Packet****Receive Packet

======== MAD_SMP_Direct_Routed ========

MAD_Header_SMP_Direct_Routed:

======== MAD_Header_SMP_Direct_Routed ========

Method : 0x1

ClassVersion : 0x1

MgmtClass : 0x81

BaseVersion : 0x1

HopCounter : 0x1

HopPointer : 0x0

Status : 0x0

D : 0x0

TID_Block_Element : 0x0000000000000041

Rsv16 : 0x0

AttributeID : 0xff60

AttributeModifier : 0x00000002

M_Key : 0x0000000000000000

DrDLID : 0xffff

DrSLID : 0xffff

omit~~~~

======== SMP_CableInfo ========

address : 0x80

page_number : 0x0

device_address : 0x50

size : 0x28

Reserved0 : 0x0

Reserved1 : 0x0000000000000000

Byte[ 0] : 0x31

Byte[ 1] : 0x31

Byte[ 2] : 0x31

Byte[ 3] : 0x31

Byte[ 4] : 0x31

Byte[ 5] : 0x31

Byte[ 6] : 0x31

Byte[ 7] : 0x31

Byte[ 8] : 0x31

Byte[ 9] : 0x31

omit~~~~

#2

Hi,

If a valid cable or module is connected QSFP, SFP+, or SFP with EEPROM in the cable/module, the connectX-3 will get the cable information from the EEPROM on the transceiver.

Did you try another AMPHENOL’s QSFP+ or just one?,and did you check it on another equipment ?