# Does SDIO support wifi?

**URL:** <https://forums.developer.nvidia.com/t/does-sdio-support-wifi/140878>\
**Category:** Jetson AGX Xavier\
**Tags:** wifi, hw\
**Created:** [July 8, 2020, 2:22am UTC](https://forums.developer.nvidia.com/t/does-sdio-support-wifi/140878 "2020-07-08T02:22:30Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![gaozejun](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@gaozejun](https://forums.developer.nvidia.com/u/gaozejun)\
**Post date:** [July 8, 2020, 2:22am UTC](https://forums.developer.nvidia.com/t/does-sdio-support-wifi/140878/1 "2020-07-08T02:22:30Z")

</div>

I need to use one kind of sdio-wifi module named ap6398s on Xavier platform, but i want to know if sdio can support wifi on Xavier?  
And I find sdio dst below :  
source/kernel\_src/hardware/nvidia/soc/t18x/kernel-dts/tegra186-soc/tegra186-soc-sdhci.dtsi

```
sdmmc1: sdhci@3400000 {
	compatible = "nvidia,tegra186-sdhci";
	reg = <0x0 0x3400000 0x0 0x210>;
	interrupts = < 0 62 0x04>;
	max-clk-limit = <204000000>;
            ddr-clk-limit = <48000000>;
	tap-delay = <11>;
	trim-delay = <5>;
	nvidia,ddr-tap-delay = <11>;
	ddr-trim-delay = <5>;
            mmc-ocr-mask = <3>;
            bus-width = <4>;
	ignore-pm-notify;
	keep-power-in-suspend;
    non-removable;
	cap-mmc-highspeed;
	cap-sd-highspeed;
	pwrdet-support;
	pinctrl-names = "sdmmc_e_33v_enable", "sdmmc_e_33v_disable";
	pinctrl-0 = <&sdmmc1_e_33V_enable>;
	pinctrl-1 = <&sdmmc1_e_33V_disable>;
	compad-vref-3v3 = <0x1>;
	compad-vref-1v8 = <0x2>;
	nvidia,min-tap-delay = <84>;
	nvidia,max-tap-delay = <136>;
	pll_source = "pll_p";
	resets = <&tegra_car TEGRA186_RESET_SDMMC1>;
	reset-names = "sdhci";
	clocks = <&tegra_car TEGRA186_CLK_SDMMC1>,
	       <&tegra_car TEGRA186_CLK_PLLP_OUT0>,
	       <&tegra_car TEGRA186_CLK_SDMMC_LEGACY_TM>;
	clock-names = "sdmmc", "pll_p", "sdmmc_legacy_tm";
	iommus = <&smmu TEGRA_SID_SDMMC1A>;
	nvidia,en-periodic-calib;
	status = "disabled";
 };

```

So status = “disabled”, I want to know where status was opened “okay”?

---

<div class="post-metadata">

**Author:** ![WayneWWW](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/waynewww/32/14043_2.png) [@WayneWWW](https://forums.developer.nvidia.com/u/WayneWWW)\
**Post date:** [July 8, 2020, 3:27am UTC](https://forums.developer.nvidia.com/t/does-sdio-support-wifi/140878/3 "2020-07-08T03:27:52Z")

</div>

Hi,

We don’t verify wifi sdio on Xavier but only on TX2. Theoretically, it should work. You could enable the status in dts first.

---

<div class="post-metadata">

**Author:** ![WayneWWW](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/waynewww/32/14043_2.png) [@WayneWWW](https://forums.developer.nvidia.com/u/WayneWWW)\
**Post date:** [July 8, 2020, 3:30am UTC](https://forums.developer.nvidia.com/t/does-sdio-support-wifi/140878/4 "2020-07-08T03:30:35Z")

</div>

Also, the reference document:  
kernel/kernel-4.9/Documentation/devicetree/bindings/mmc/sdhci-tegra.txt

---

<div class="post-metadata">

**Author:** ![WayneWWW](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/waynewww/32/14043_2.png) [@WayneWWW](https://forums.developer.nvidia.com/u/WayneWWW)\
**Post date:** [July 8, 2020, 3:53am UTC](https://forums.developer.nvidia.com/t/does-sdio-support-wifi/140878/5 "2020-07-08T03:53:27Z")

</div>

btw, xavier is t194 platform but not t186.

---

<div class="post-metadata">

**Author:** ![gaozejun](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@gaozejun](https://forums.developer.nvidia.com/u/gaozejun)\
**Post date:** [July 8, 2020, 3:59am UTC](https://forums.developer.nvidia.com/t/does-sdio-support-wifi/140878/6 "2020-07-08T03:59:34Z")

</div>

```
sdhci@3400000 {
	mmc-ocr-mask = <0x0>;
	cd-gpios = <&tegra_main_gpio TEGRA194_MAIN_GPIO(G, 7) 0>;
   non-removable;
   max-frequency = <50000000>;
	nvidia,cd-wakeup-capable;
	nvidia,vmmc-always-on;
    only-1-8-v;
	status = "okay";
};

```

---

<div class="post-metadata">

**Author:** ![WayneWWW](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/waynewww/32/14043_2.png) [@WayneWWW](https://forums.developer.nvidia.com/u/WayneWWW)\
**Post date:** [July 8, 2020, 4:01am UTC](https://forums.developer.nvidia.com/t/does-sdio-support-wifi/140878/7 "2020-07-08T04:01:55Z")

</div>

Below is the list from my TX2 which has TX2 enabled.

nvidia@nvidia-desktop:/proc/device-tree/sdhci@3440000$ ll  
-r–r–r-- 1 root root 4 Jul 7 23:32 bus-width  
-r–r–r-- 1 root root 0 Jul 7 23:32 cap-mmc-highspeed  
-r–r–r-- 1 root root 0 Jul 7 23:32 cap-sd-highspeed  
-r–r–r-- 1 root root 28 Jul 7 23:32 clock-names  
-r–r–r-- 1 root root 24 Jul 7 23:32 clocks  
-r–r–r-- 1 root root 4 Jul 7 23:32 compad-vref-1v8  
-r–r–r-- 1 root root 4 Jul 7 23:32 compad-vref-3v3  
-r–r–r-- 1 root root 22 Jul 7 23:32 compatible  
-r–r–r-- 1 root root 4 Jul 7 23:32 ddr-clk-limit  
-r–r–r-- 1 root root 4 Jul 7 23:32 ddr-trim-delay  
-r–r–r-- 1 root root 0 Jul 7 23:32 force-non-removable-rescan  
-r–r–r-- 1 root root 0 Jul 7 23:32 ignore-pm-notify  
-r–r–r-- 1 root root 12 Jul 7 23:32 interrupts  
-r–r–r-- 1 root root 0 Jul 7 23:32 keep-power-in-suspend  
-r–r–r-- 1 root root 4 Jul 7 23:32 linux,phandle  
-r–r–r-- 1 root root 4 Jul 7 23:32 max-clk-limit  
-r–r–r-- 1 root root 4 Jul 7 23:32 mmc-ocr-mask  
-r–r–r-- 1 root root 6 Jul 7 23:32 name  
-r–r–r-- 1 root root 0 Jul 7 23:32 non-removable  
-r–r–r-- 1 root root 4 Jul 7 23:32 nvidia,ddr-tap-delay  
-r–r–r-- 1 root root 0 Jul 7 23:32 nvidia,en-periodic-calib  
-r–r–r-- 1 root root 4 Jul 7 23:32 nvidia,max-tap-delay  
-r–r–r-- 1 root root 4 Jul 7 23:32 nvidia,min-tap-delay  
-r–r–r-- 1 root root 0 Jul 7 23:32 only-1-8-v  
-r–r–r-- 1 root root 4 Jul 7 23:32 phandle  
-r–r–r-- 1 root root 4 Jul 7 23:32 pinctrl-0  
-r–r–r-- 1 root root 4 Jul 7 23:32 pinctrl-1  
-r–r–r-- 1 root root 39 Jul 7 23:32 pinctrl-names  
-r–r–r-- 1 root root 6 Jul 7 23:32 pll\_source  
drwxr-xr-x 11 root root 0 Jul 7 23:32 prod-settings/  
-r–r–r-- 1 root root 0 Jul 7 23:32 pwrdet-support  
-r–r–r-- 1 root root 16 Jul 7 23:32 reg  
-r–r–r-- 1 root root 6 Jul 7 23:32 reset-names  
-r–r–r-- 1 root root 8 Jul 7 23:32 resets  
-r–r–r-- 1 root root 5 Jul 7 23:32 status  
-r–r–r-- 1 root root 4 Jul 7 23:32 tap-delay  
-r–r–r-- 1 root root 4 Jul 7 23:32 trim-delay  
-r–r–r-- 1 root root 4 Jul 7 23:32 uhs-mask  
-r–r–r-- 1 root root 4 Jul 7 23:32 vmmc-supply  
-r–r–r-- 1 root root 4 Jul 7 23:32 vqmmc-supply

---

<div class="post-metadata">

**Author:** ![gaozejun](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@gaozejun](https://forums.developer.nvidia.com/u/gaozejun)\
**Post date:** [July 8, 2020, 5:41am UTC](https://forums.developer.nvidia.com/t/does-sdio-support-wifi/140878/8 "2020-07-08T05:41:21Z")

</div>

![3](https://global.discourse-cdn.com/nvidia/original/3X/0/2/02dade026b82cc645a20f933a484cd018716437f.jpeg)

 ![4](https://global.discourse-cdn.com/nvidia/original/3X/d/3/d377aa2e5557a55f5c8cda150462e2aab6d605e7.jpeg)

CMD Voltage is in abnormal status , you can see it in red circle.

---

<div class="post-metadata">

**Author:** ![WayneWWW](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/waynewww/32/14043_2.png) [@WayneWWW](https://forums.developer.nvidia.com/u/WayneWWW)\
**Post date:** [July 8, 2020, 5:47am UTC](https://forums.developer.nvidia.com/t/does-sdio-support-wifi/140878/9 "2020-07-08T05:47:26Z")

</div>

Hi,

I only debug from the software.

Please share your dmesg and device tree under sdhci@34000000 as text file.  
It is hard to read by image.

---

<div class="post-metadata">

**Author:** ![gaozejun](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@gaozejun](https://forums.developer.nvidia.com/u/gaozejun)\
**Post date:** [July 8, 2020, 5:54am UTC](https://forums.developer.nvidia.com/t/does-sdio-support-wifi/140878/10 "2020-07-08T05:54:57Z")

</div>

Dst show below, whether or not is there one way to increase the ability to driver the cmd-pin?

sdmmc1: sdhci@3400000 {  
compatible = “nvidia,tegra194-sdhci”;  
reg = \<0x0 0x3400000 0x0 0x00020000\>;  
interrupts = \< 0 TEGRA194\_IRQ\_SDMMC1 0x04\>;  
iommus = \<&smmu TEGRA\_SID\_SDMMC1A\>;  
dma-coherent;  
max-clk-limit = \<208000000\>;  
bus-width = \<4\>;  
cap-mmc-highspeed;  
cap-sd-highspeed;  
sd-uhs-sdr104;  
sd-uhs-sdr50;  
sd-uhs-sdr25;  
sd-uhs-sdr12;  
mmc-ddr-1\_8v;  
mmc-hs200-1\_8v;  
nvidia,vqmmc-always-on;  
cd-inverted;  
nvidia,min-tap-delay = \<96\>;  
nvidia,max-tap-delay = \<139\>;  
pwrdet-support;  
pinctrl-names = “sdmmc\_e\_33v\_enable”, “sdmmc\_e\_33v\_disable”;  
pinctrl-0 = \<&sdmmc1\_e\_33V\_enable\>;  
pinctrl-1 = \<&sdmmc1\_e\_33V\_disable\>;  
ignore-pm-notify;  
resets = \<&bpmp\_resets TEGRA194\_RESET\_SDMMC1\>;  
reset-names = “sdhci”;  
pll\_source = “pll\_p”, “pll\_c4\_muxed”;  
nvidia,set-parent-clk;  
nvidia,parent\_clk\_list = “pll\_p”, “pll\_p”, “pll\_p”, “pll\_p”, “pll\_p”, “pll\_c4\_muxed”, “pll\_c4\_muxed”, “pll\_c4\_muxed”, “pll\_c4\_muxed”, “pll\_c4\_muxed”, “NULL”;  
clocks = \<&bpmp\_clks TEGRA194\_CLK\_SDMMC1\>,  
\<&bpmp\_clks TEGRA194\_CLK\_PLLP\_OUT0\>,  
\<&bpmp\_clks TEGRA194\_CLK\_PLLC4\_MUXED\>,  
\<&bpmp\_clks TEGRA194\_CLK\_SDMMC\_LEGACY\_TM\>;  
clock-names = “sdmmc”, “pll\_p”, “pll\_c4\_muxed”, “sdmmc\_legacy\_tm”;  
uhs-mask = \<0x08\>;  
nvidia,en-periodic-calib;  
status = “disabled”;  
};

sdhci@3400000 {  
mmc-ocr-mask = \<0x0\>;  
cd-gpios = \<&tegra\_main\_gpio TEGRA194\_MAIN\_GPIO(G, 7) 0\>;  
non-removable;  
nvidia,cd-wakeup-capable;  
nvidia,vmmc-always-on;  
compad-vref-3v3 = \<0x7\>;  
compad-vref-1v8 = \<0x7\>;  
only-1-8-v;  
status = “okay”;  
};

---

<div class="post-metadata">

**Author:** ![WayneWWW](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/waynewww/32/14043_2.png) [@WayneWWW](https://forums.developer.nvidia.com/u/WayneWWW)\
**Post date:** [July 8, 2020, 5:56am UTC](https://forums.developer.nvidia.com/t/does-sdio-support-wifi/140878/11 "2020-07-08T05:56:56Z")

</div>

Hi,

Please also share the kernel log (dmesg) too.

---

<div class="post-metadata">

**Author:** ![gaozejun](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@gaozejun](https://forums.developer.nvidia.com/u/gaozejun)\
**Post date:** [July 8, 2020, 6:01am UTC](https://forums.developer.nvidia.com/t/does-sdio-support-wifi/140878/12 "2020-07-08T06:01:48Z")

</div>

The kernel log must wait for some time,I just power down the board to change some resistances.

Whether or not is there one way from the software to increase the ability(the driving cureent) to driver the cmd-pin？

---

<div class="post-metadata">

**Author:** ![WayneWWW](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/waynewww/32/14043_2.png) [@WayneWWW](https://forums.developer.nvidia.com/u/WayneWWW)\
**Post date:** [July 8, 2020, 6:07am UTC](https://forums.developer.nvidia.com/t/does-sdio-support-wifi/140878/13 "2020-07-08T06:07:09Z")

</div>

Hi,

You also have difference between your dts and the dts from TX2. Please also check those.

Thanks.

---

<div class="post-metadata">

**Author:** ![gaozejun](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@gaozejun](https://forums.developer.nvidia.com/u/gaozejun)\
**Post date:** [July 8, 2020, 6:10am UTC](https://forums.developer.nvidia.com/t/does-sdio-support-wifi/140878/14 "2020-07-08T06:10:13Z")

</div>

I dont know TX2, can you show me the sdio-dst on TX2 platform?

---

<div class="post-metadata">

**Author:** ![WayneWWW](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/waynewww/32/14043_2.png) [@WayneWWW](https://forums.developer.nvidia.com/u/WayneWWW)\
**Post date:** [July 8, 2020, 6:11am UTC](https://forums.developer.nvidia.com/t/does-sdio-support-wifi/140878/15 "2020-07-08T06:11:30Z")

</div>

I just pasted that above… if you need any detail for specific property, please let me know.

---

<div class="post-metadata">

**Author:** ![gaozejun](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@gaozejun](https://forums.developer.nvidia.com/u/gaozejun)\
**Post date:** [July 8, 2020, 6:15am UTC](https://forums.developer.nvidia.com/t/does-sdio-support-wifi/140878/16 "2020-07-08T06:15:03Z")

</div>

I mean the dst such as this shown below ,that you pasted has no value.

sdmmc1: sdhci@3400000 {  
compatible = “nvidia,tegra194-sdhci”;  
reg = \<0x0 0x3400000 0x0 0x00020000\>;  
interrupts = \< 0 TEGRA194\_IRQ\_SDMMC1 0x04\>;  
iommus = \<&smmu TEGRA\_SID\_SDMMC1A\>;  
dma-coherent;  
max-clk-limit = \<208000000\>;  
bus-width = \<4\>;  
cap-mmc-highspeed;  
cap-sd-highspeed;  
sd-uhs-sdr104;  
sd-uhs-sdr50;  
sd-uhs-sdr25;  
sd-uhs-sdr12;  
mmc-ddr-1\_8v;  
mmc-hs200-1\_8v;  
nvidia,vqmmc-always-on;  
cd-inverted;  
nvidia,min-tap-delay = \<96\>;  
nvidia,max-tap-delay = \<139\>;  
pwrdet-support;  
pinctrl-names = “sdmmc\_e\_33v\_enable”, “sdmmc\_e\_33v\_disable”;  
pinctrl-0 = \<&sdmmc1\_e\_33V\_enable\>;  
pinctrl-1 = \<&sdmmc1\_e\_33V\_disable\>;  
ignore-pm-notify;  
resets = \<&bpmp\_resets TEGRA194\_RESET\_SDMMC1\>;  
reset-names = “sdhci”;  
pll\_source = “pll\_p”, “pll\_c4\_muxed”;  
nvidia,set-parent-clk;  
nvidia,parent\_clk\_list = “pll\_p”, “pll\_p”, “pll\_p”, “pll\_p”, “pll\_p”, “pll\_c4\_muxed”, “pll\_c4\_muxed”, “pll\_c4\_muxed”, “pll\_c4\_muxed”, “pll\_c4\_muxed”, “NULL”;  
clocks = \<&bpmp\_clks TEGRA194\_CLK\_SDMMC1\>,  
\<&bpmp\_clks TEGRA194\_CLK\_PLLP\_OUT0\>,  
\<&bpmp\_clks TEGRA194\_CLK\_PLLC4\_MUXED\>,  
\<&bpmp\_clks TEGRA194\_CLK\_SDMMC\_LEGACY\_TM\>;  
clock-names = “sdmmc”, “pll\_p”, “pll\_c4\_muxed”, “sdmmc\_legacy\_tm”;  
uhs-mask = \<0x08\>;  
nvidia,en-periodic-calib;  
status = “disabled”;  
};

---

<div class="post-metadata">

**Author:** ![WayneWWW](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/waynewww/32/14043_2.png) [@WayneWWW](https://forums.developer.nvidia.com/u/WayneWWW)\
**Post date:** [July 8, 2020, 6:18am UTC](https://forums.developer.nvidia.com/t/does-sdio-support-wifi/140878/17 "2020-07-08T06:18:58Z")

</div>

Hi,

I think you could just compare the property name and tell us what you are lacking of.  
I don’t want you to get confused by the whole tx2 dts because the clk and pin info are all different.

---

<div class="post-metadata">

**Author:** ![gaozejun](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@gaozejun](https://forums.developer.nvidia.com/u/gaozejun)\
**Post date:** [July 8, 2020, 6:28am UTC](https://forums.developer.nvidia.com/t/does-sdio-support-wifi/140878/18 "2020-07-08T06:28:31Z")

</div>

I lack these below ,

force-non-removable-rescan;  
vqmmc-supply  
keep-power-in-suspend;  
tap-delay  
trim-delay  
ddr-clk-limit  
ddr-trim-delay

---

<div class="post-metadata">

**Author:** ![WayneWWW](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/waynewww/32/14043_2.png) [@WayneWWW](https://forums.developer.nvidia.com/u/WayneWWW)\
**Post date:** [July 8, 2020, 6:46am UTC](https://forums.developer.nvidia.com/t/does-sdio-support-wifi/140878/19 "2020-07-08T06:46:04Z")

</div>

Hi,

please add force-non-removable-rescan and keep-power-in-suspend directly.

and share us the dmesg and final dts file as attachment.

Thanks.

---

<div class="post-metadata">

**Author:** ![gaozejun](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@gaozejun](https://forums.developer.nvidia.com/u/gaozejun)\
**Post date:** [July 8, 2020, 12:14pm UTC](https://forums.developer.nvidia.com/t/does-sdio-support-wifi/140878/20 "2020-07-08T12:14:11Z")

</div>

Hi,  
FInal dts file:

```
sdmmc1: sdhci@3400000 {
	compatible = "nvidia,tegra194-sdhci";
	reg = <0x0 0x3400000 0x0 0x00020000>;
	interrupts = < 0 TEGRA194_IRQ_SDMMC1 0x04>;
	iommus = <&smmu TEGRA_SID_SDMMC1A>;
	dma-coherent;
	max-clk-limit = <208000000>;
	bus-width = <4>;
	cap-mmc-highspeed;
	cap-sd-highspeed;
	sd-uhs-sdr104;
	sd-uhs-sdr50;
	sd-uhs-sdr25;
	sd-uhs-sdr12;
	mmc-ddr-1_8v;
	mmc-hs200-1_8v;
	nvidia,vqmmc-always-on;
	cd-inverted;
	nvidia,min-tap-delay = <96>;
	nvidia,max-tap-delay = <139>;
	pwrdet-support;
	pinctrl-names = "sdmmc_e_33v_enable", "sdmmc_e_33v_disable";
	pinctrl-0 = <&sdmmc1_e_33V_enable>;
	pinctrl-1 = <&sdmmc1_e_33V_disable>;
	ignore-pm-notify;
	resets = <&bpmp_resets TEGRA194_RESET_SDMMC1>;
	reset-names = "sdhci";
	pll_source = "pll_p", "pll_c4_muxed";
	nvidia,set-parent-clk;
	nvidia,parent_clk_list = "pll_p", "pll_p", "pll_p", "pll_p", "pll_p", "pll_c4_muxed", "pll_c4_muxed", "pll_c4_muxed", "pll_c4_muxed", "pll_c4_muxed", "NULL";
	clocks = <&bpmp_clks TEGRA194_CLK_SDMMC1>,
		<&bpmp_clks TEGRA194_CLK_PLLP_OUT0>,
		<&bpmp_clks TEGRA194_CLK_PLLC4_MUXED>,
		<&bpmp_clks TEGRA194_CLK_SDMMC_LEGACY_TM>;
	clock-names = "sdmmc", "pll_p", "pll_c4_muxed", "sdmmc_legacy_tm";
	uhs-mask = <0x08>;
	nvidia,en-periodic-calib;
	status = "disabled";
 };

sdhci@3400000 {
	mmc-ocr-mask = <0x0>;
	cd-gpios = <&tegra_main_gpio TEGRA194_MAIN_GPIO(G, 7) 0>;
	nvidia,cd-wakeup-capable;
    force-non-removable-rescan;
    keep-power-in-suspend;
	nvidia,vmmc-always-on;
    compad-vref-3v3 = <0x7>;
	compad-vref-1v8 = <0x7>;
    only-1-8-v;
	status = "okay";
};

```

And appendix is the dmesg log .[log.txt](https://forums.developer.nvidia.com/uploads/short-url/e0zkoU039tg9JZZzhzHhmy6nVZR.txt) (93.8 KB)

---

<div class="post-metadata">

**Author:** ![gaozejun](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@gaozejun](https://forums.developer.nvidia.com/u/gaozejun)\
**Post date:** [July 9, 2020, 1:41am UTC](https://forums.developer.nvidia.com/t/does-sdio-support-wifi/140878/21 "2020-07-09T01:41:45Z")

</div>

Hi,  
SDIO still can not scan the wifi module(ap6398s).Please help me analys the log on #19.

[Next page](https://forums.developer.nvidia.com/t/does-sdio-support-wifi/140878.md?page=2)