Driver to use 3 CSI leopard cameras

Robotics & Edge Computing Jetson & Embedded Systems Jetson TX2
1

Driver for use 3 CSI cameras for leopard image (https://leopardimaging.com/product/li-jetson-kit-imx274-x/) only works on L4T 28.2, this version have gstreamer 1.8 that don’t have the nvcompositor plugin. I need to composing a imagem from 3 cameras, using the “compositor” from gstreamer theres a very poor performance.
So, my question is: is there any way to have the 3 CSI cameras working on L4T 32.2 to have the latest gstreamer?, or: is possible to install gstreamer 1.14 on L4T?

Thanks!

2

Hi alfredosalvarani,

We may develop the TX2 IMX274 driver based on Jetpack 4.2 in May 2019.
For gstreamer 1.14, you can download it online and try installing it to TX2 manually.

3

Dear SimonZhu,
I bought LI-TX1-CB Rev. 1.3 and IMX274 v1.1 but I do not know how to make camera work.
Could you please provide driver and instruction to run camera?
Best regards,

4

Hi Quang_OpenStack,

Please contact support@leopardimaging.com for the drivers.