# DS3 Docker Tiled Display Not Showing **URL:** \ **Category:** DeepStream SDK\ **Created:** [December 20, 2018, 9:26am UTC](https://forums.developer.nvidia.com/t/ds3-docker-tiled-display-not-showing/68720 "2018-12-20T09:26:03Z")\ **Posts on this page:** 16\ **Page:** 1
**Author:** ![cw.yong](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@cw.yong](https://forums.developer.nvidia.com/u/cw.yong)\ **Post date:** [December 20, 2018, 9:26am UTC](https://forums.developer.nvidia.com/t/ds3-docker-tiled-display-not-showing/68720/1 "2018-12-20T09:26:03Z")
Running Deep Stream 3 docker. Ubuntu 16.04 NVIDIA Driver: 410.79 Executed sample config file. Out.mp4 was produced but there is no display showing. Note: Installed nvidia driver with “–no-opengl-files” argument to avoid log in loop issue. Is this the cause for having no display? ---
**Author:** ![Amycao](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/amycao/32/11342_2.png) [@Amycao](https://forums.developer.nvidia.com/u/Amycao)\ **Post date:** [December 21, 2018, 2:30am UTC](https://forums.developer.nvidia.com/t/ds3-docker-tiled-display-not-showing/68720/2 "2018-12-21T02:30:40Z")
Can you paste your config and ouput.mp4 here? ---
**Author:** ![cw.yong](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@cw.yong](https://forums.developer.nvidia.com/u/cw.yong)\ **Post date:** [December 21, 2018, 3:20am UTC](https://forums.developer.nvidia.com/t/ds3-docker-tiled-display-not-showing/68720/3 "2018-12-21T03:20:24Z")
> [@](#): > > Can you paste your config and ouput.mp4 here? Using “source4\_720p\_dec\_infer-resnet\_tracker\_sgie\_tiled\_display\_int8.txt” Config: ```auto [application] enable-perf-measurement=1 perf-measurement-interval-sec=5 #gie-kitti-output-dir=streamscl [tiled-display] enable=1 rows=2 columns=2 width=1280 height=720 gpu-id=0 # 0 - cuda pinned/host memory # 1 - cuda device memory # 2 - cuda unified memory cuda-memory-type=1 [source0] enable=1 #Type - 1=CameraV4L2 2=URI 3=MultiURI type=3 uri=file://../../streams/sample_720p.mp4 num-sources=4 gpu-id=0 # 0 - cuda pinned/host memory # 1 - cuda device memory # 2 - cuda unified memory cuda-memory-type=1 [sink0] enable=0 #Type - 1=FakeSink 2=EglSink 3=File type=2 sync=1 source-id=0 gpu-id=0 cuda-memory-type=1 [sink1] enable=1 type=3 #1=mp4 2=mkv container=1 #1=h264 2=h265 3=mpeg4 ## only SW mpeg4 is supported right now. codec=3 sync=0 bitrate=2000000 output-file=out.mp4 source-id=0 [sink2] enable=0 #Type - 1=FakeSink 2=EglSink 3=File 4=RTSPStreaming type=4 #1=mp4 2=mkv container=2 #1=h264 2=h265 3=mpeg4 ## only mpeg4 is supported right now. codec=1 sync=0 bitrate=4000 # set below properties in case of RTSPStreaming rtsp-port=8554 udp-port=5400 [osd] enable=1 gpu-id=0 border-width=1 text-size=15 text-color=1;1;1;1; text-bg-color=0.3;0.3;0.3;1 font=Arial show-clock=0 clock-x-offset=800 clock-y-offset=820 clock-text-size=12 clock-color=1;0;0;0 cuda-memory-type=1 [streammux] gpu-id=0 ##Boolean property to inform muxer that sources are live live-source=0 batch-size=4 ##time out in usec, to wait after the first buffer is available ##to push the batch even if the complete batch is not formed batched-push-timeout=40000 ## Set muxer output width and height width=1280 height=720 ##Enable to maintain aspect ratio wrt source, and allow black borders, works ##along with width, height properties enable-padding=0 cuda-memory-type=1 # config-file property is mandatory for any gie section. # Other properties are optional and if set will override the properties set in # the infer config file. [primary-gie] enable=1 gpu-id=0 model-engine-file=../../models/Primary_Detector/resnet10.caffemodel_b4_int8.engine labelfile-path=../../models/Primary_Detector/labels.txt batch-size=4 #Required by the app for OSD, not a plugin property bbox-border-color0=1;0;0;1 bbox-border-color1=0;1;1;1 bbox-border-color2=0;0;1;1 bbox-border-color3=0;1;0;1 interval=0 gie-unique-id=1 cuda-memory-type=1 config-file=config_infer_primary.txt [tracker] enable=1 tracker-width=640 tracker-height=368 gpu-id=0 [secondary-gie0] enable=1 model-engine-file=../../models/Secondary_VehicleTypes/resnet18.caffemodel_b16_i$ labelfile-path=../../models/Secondary_VehicleTypes/labels.txt gpu-id=0 batch-size=16 gie-unique-id=4 operate-on-gie-id=1 operate-on-class-ids=0; config-file=config_infer_secondary_vehicletypes.txt [secondary-gie1] enable=1 model-engine-file=../../models/Secondary_CarColor/resnet18.caffemodel_b16_int8.$ labelfile-path=../../models/Secondary_CarColor/labels.txt batch-size=16 gpu-id=0 gie-unique-id=5 operate-on-gie-id=1 operate-on-class-ids=0; config-file=config_infer_secondary_carcolor.txt [secondary-gie2] enable=1 model-engine-file=../../models/Secondary_CarMake/resnet18.caffemodel_b16_int8.e$ labelfile-path=../../models/Secondary_CarMake/labels.txt batch-size=16 gpu-id=0 gie-unique-id=6 operate-on-gie-id=1 operate-on-class-ids=0; config-file=config_infer_secondary_carmake.txt [tests] file-loop=0 ``` Can you suggest me a way to upload the out.mp4 video to here? [out.mp4.7z](https://forums.developer.nvidia.com/uploads/short-url/ibbTfUCFEnF7t1XvtGOFQEstQwc.7z) (10.1 MB) ---
**Author:** ![Amycao](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/amycao/32/11342_2.png) [@Amycao](https://forums.developer.nvidia.com/u/Amycao)\ **Post date:** [December 21, 2018, 5:59am UTC](https://forums.developer.nvidia.com/t/ds3-docker-tiled-display-not-showing/68720/4 "2018-12-21T05:59:07Z")
from your comment, put the mouse click on the right upper corner, you will see “Add attachment” ---
**Author:** ![cw.yong](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@cw.yong](https://forums.developer.nvidia.com/u/cw.yong)\ **Post date:** [December 26, 2018, 2:04am UTC](https://forums.developer.nvidia.com/t/ds3-docker-tiled-display-not-showing/68720/5 "2018-12-26T02:04:38Z")
> [@](#): > > from your comment, put the mouse click on the right upper corner, you will see “Add attachment” Hi, Thank you for the guide. I have uploaded the video. Just to clarify, the video is working fine (showing correct output). The issue is there is no on-screen display when Deepstream is running. Thanks ---
**Author:** ![Amycao](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/amycao/32/11342_2.png) [@Amycao](https://forums.developer.nvidia.com/u/Amycao)\ **Post date:** [December 26, 2018, 2:20am UTC](https://forums.developer.nvidia.com/t/ds3-docker-tiled-display-not-showing/68720/6 "2018-12-26T02:20:08Z")
> [@](#): > > > [@](#): > > > > from your comment, put the mouse click on the right upper corner, you will see “Add attachment” > > Hi, Thank you for the guide. I have uploaded the video. > > Just to clarify, the video is working fine (showing correct output). The issue is there is no on-screen display when Deepstream is running. > > Thanks I do not the see the video, also, what do you mean no on-screen display? don’t you use sink type 3=File for output? if you use this type, will output to the file, let’s say one mp4 file. if you want to output to the screen, you should use sink type 2=EglSink ---
**Author:** ![cw.yong](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@cw.yong](https://forums.developer.nvidia.com/u/cw.yong)\ **Post date:** [December 26, 2018, 2:59am UTC](https://forums.developer.nvidia.com/t/ds3-docker-tiled-display-not-showing/68720/7 "2018-12-26T02:59:28Z")
> [@](#): > > > [@](#): > > > > > [@](#): > > > > > > from your comment, put the mouse click on the right upper corner, you will see “Add attachment” > > > > Hi, Thank you for the guide. I have uploaded the video. > > > > Just to clarify, the video is working fine (showing correct output). The issue is there is no on-screen display when Deepstream is running. > > > > Thanks > > I do not the see the video, also, what do you mean no on-screen display? don’t you use sink type 3=File for > output? if you use this type, will output to the file, let’s say one mp4 file. if you want to output to the screen, you should use sink type 2=EglSink Hi amycao, I tried to execute the default config **source4\_720p\_dec\_infer-resnet\_tracker\_sgie\_tiled\_display\_int8.txt** which is using sink0 type 2 (EglSink), but giving me the following error. ```auto * ERROR: : Failed to set pipeline to PAUSED Quitting App run failed ``` ---
**Author:** ![Amycao](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/amycao/32/11342_2.png) [@Amycao](https://forums.developer.nvidia.com/u/Amycao)\ **Post date:** [December 26, 2018, 3:07am UTC](https://forums.developer.nvidia.com/t/ds3-docker-tiled-display-not-showing/68720/8 "2018-12-26T03:07:07Z")
if you run the application from remote, make sure export DISPLAY=:0 first before run, or you can run the app from desktop. ---
**Author:** ![cw.yong](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@cw.yong](https://forums.developer.nvidia.com/u/cw.yong)\ **Post date:** [December 26, 2018, 3:34am UTC](https://forums.developer.nvidia.com/t/ds3-docker-tiled-display-not-showing/68720/9 "2018-12-26T03:34:12Z")
> [@](#): > > if you run the application from remote, make sure export DISPLAY=:0 first before run, or you can run the app > from desktop. Before running the docker, I executed the following commands: ```auto export DISPLAY=:0 xhost + nvidia-docker run -it --rm -v /tmp/.X11-unix:/tmp/.X11-unix -e DISPLAY=$DISPLAY -w /root nvcr.io/nvidia/deepstream:3.0-18.11 ``` Receiving the same error. Any idea on the error? ---
**Author:** ![Amycao](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/amycao/32/11342_2.png) [@Amycao](https://forums.developer.nvidia.com/u/Amycao)\ **Post date:** [December 26, 2018, 3:54am UTC](https://forums.developer.nvidia.com/t/ds3-docker-tiled-display-not-showing/68720/10 "2018-12-26T03:54:29Z")
please first make sure you can use your server environment to run success with sink to eglsink, to rule out environments issue, then try with docker. ---
**Author:** ![cw.yong](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@cw.yong](https://forums.developer.nvidia.com/u/cw.yong)\ **Post date:** [December 26, 2018, 3:58am UTC](https://forums.developer.nvidia.com/t/ds3-docker-tiled-display-not-showing/68720/11 "2018-12-26T03:58:16Z")
> [@](#): > > please first make sure you can use your server environment to run success with sink to eglsink, to rule out > environments issue, then try with docker. Could you share some sample applications for me to test the server environment with sink to eglsink? ---
**Author:** ![Amycao](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/amycao/32/11342_2.png) [@Amycao](https://forums.developer.nvidia.com/u/Amycao)\ **Post date:** [December 26, 2018, 5:47am UTC](https://forums.developer.nvidia.com/t/ds3-docker-tiled-display-not-showing/68720/12 "2018-12-26T05:47:35Z")
just like you use in docker, deepstream-app -c /path to config/source30\_720p\_dec\_infer-resnet\_tiled\_display\_int8.txt change sink type to 2=EglSink in the config, please make sure you follow the README within the deepstream package. ---
**Author:** ![cw.yong](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@cw.yong](https://forums.developer.nvidia.com/u/cw.yong)\ **Post date:** [December 27, 2018, 2:45am UTC](https://forums.developer.nvidia.com/t/ds3-docker-tiled-display-not-showing/68720/13 "2018-12-27T02:45:10Z")
Solution found. Inserting another GPU card (GTX1050) for output display. Note: Configure the BIOS to use GTX1050 for offboard display Run DS sample with the following command, ```auto deepstream-app -c /path to config/source30_720p_dec_infer-resnet_tiled_display_int8.txt ``` Check GPU usage while running DS sample with ```auto nvidia-smi ``` Tesla P4 will be used by deepstream for inference purpose. GTX1050 will be used by deepstream for visualization. Tilted display show correctly. @amycao, do we require to have 2 GPUs for visualization purpose at the beginning? ---
**Author:** ![Amycao](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/amycao/32/11342_2.png) [@Amycao](https://forums.developer.nvidia.com/u/Amycao)\ **Post date:** [December 27, 2018, 4:14am UTC](https://forums.developer.nvidia.com/t/ds3-docker-tiled-display-not-showing/68720/14 "2018-12-27T04:14:29Z")
If you need to output to screen, yes, you need one nvidia graphic card which support display, a hacky way to use Tesla p4 for virtual display, but just suggest for developments, since it will take some percent of device memory, finally impact the inference perf in this case deepstream, sudo nvidia-xconfig --query-gpu-info Number of GPUs: 2 GPU #0: Name : Tesla T4 UUID : GPU-b58f5878-b235-c28e-4e2a-44d8623d133a PCI BusID : PCI:3:0:0 Number of Display Devices: 0 GPU #1: Name : Tesla P4 UUID : GPU-55bc88aa-fc94-0e86-9319-abd5fadf49ab PCI BusID : PCI:4:0:0 Number of Display Devices: 0 sudo nvidia-xconfig --busid=PCI:4:0:0 --allow-empty-initial-configuration reboot system, install nomachine from your windows system, and also need install nomachine on your linux server which have p4 installed, and login to desktop using nomachine from windows system. ---
**Author:** ![cw.yong](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@cw.yong](https://forums.developer.nvidia.com/u/cw.yong)\ **Post date:** [December 27, 2018, 5:59am UTC](https://forums.developer.nvidia.com/t/ds3-docker-tiled-display-not-showing/68720/15 "2018-12-27T05:59:09Z")
Hi @amycao, Thanks for the suggestion. I will proceed with the dual GPU for now. In future, I might try the method you mentioned above. Appreciate your help. Thanks. ---
**Author:** ![TomNVIDIA](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/tomnvidia/32/14181_2.png) [@TomNVIDIA](https://forums.developer.nvidia.com/u/TomNVIDIA)\ **Post date:** [October 12, 2021, 4:19pm UTC](https://forums.developer.nvidia.com/t/ds3-docker-tiled-display-not-showing/68720/16 "2021-10-12T16:19:47Z")