Hi, What we want to achieve is prior to sending the init-cmd, read the display IDs (0xDA 0xDB 0xDC) To that end we are using tegra_dsi_read_data() The display works fine in video mode after init-cmd is sent on this tx2 platform Reading panel registers on TX2 results in FIFO being empty and a 218…

DSI display: does tegra_dsi_read_data() work?

WayneWWW February 18, 2022, 3:33am 5

Please also refer to other user’s post here. He enabled DSI recently. Though it is on the TX2-NX.

Topic		Replies	Views
Turn off HDMI programmatically Jetson TX2	60	4586	December 19, 2018
DSI panel setup issues Jetson TX2	4	783	July 3, 2018
MIPI DSI display on Jetson TX2 Jetson TX2	7	2324	February 19, 2020
No DSI MIPI data on custom carrier board Jetson TX2 dsi-display	46	2267	February 28, 2022
R32.3.1 mipi dsi lcd Jetson TX2 dsi-display	64	2359	October 18, 2021
How can drive SN65DIS85? Jetson Nano kernel , dsi-display	20	2921	August 4, 2021
DSI display Jetson TK1	22	7262	October 18, 2021
Jetson tx2 mipi read reg fail Jetson TX2	17	2687	January 31, 2020
[TX2] MIPI DSI registers is not read Jetson TX2 dsi-display	8	964	October 18, 2021
DSI display on the TX1 Jetson TX1	26	3557	August 24, 2017