DTB_FILE setting not used in JetPack 6.0

[DaveYYY]

You should get stuff like this:

Flashing device tree from L4T 32.5.1

Hi, Upon Device Tree (DT) modification and compilation the file was copied to a host and flashed successfully but when I tried to verify whether the DT is actually flashed I found that some fields which were expected to be modifed where not. I am flashing the tegra186-quill-p3310-1000-c03-00-base.dtb file, which was positioned in the directory /home/nvidia/HWImage/JetPack_4.5_Linux_JETSON_TX2/Linux_for_Tegra/kernel/dtb the command to flash is sudo ./flash.sh -r -k kernel-dtb jetson-tx2 …