Electrical SD Card Detect on the Nano

For a carrier I am designing the micro SD Card connector we are using does not have a mechanical card detect signal built into the connector. So we can’t simply wire it to GPIO08 (Pin 208). Therefore I intend to use electrical card detection on SDMMC_DAT3 as per the SD card specification. Does the Nano and the driver support this?

See page 18 and 19 in this document below for more info:

https://www.mouser.com/datasheet/2/302/AN10911-112956.pdf

Yes for hw, please refer to this topic: https://devtalk.nvidia.com/default/topic/952384