Hi Support team, I have Jetson nano B01 module And I want to flash its EMMC. I have connected nano device with Ubuntu 20.04 and Setup Recovery Mode like Pins 9 and 10 connected with Jumper and connect etharnet cable. After that Power on the device. I am getting below when use lsusb commands. And …

Not sure why you have to filed so many duplicated topics. Cause is due to missing this lib. [image] Can I flash jetson nano eMMC? Jetson Nano Please run below command on your host. And you can flash the board. sudo apt-get install libxml2-utils

Emmc flash in Jetson nano

Autonomous Machines Jetson & Embedded Systems Jetson Nano

WayneWWW October 8, 2021, 2:42am 4

Not sure why you have to filed so many duplicated topics.

Cause is due to missing this lib.