# Emulation Flash Configurations not working with Jetpack 6.0 **URL:** \ **Category:** Jetson AGX Orin\ **Tags:** reflash\ **Created:** [November 21, 2024, 8:38pm UTC](https://forums.developer.nvidia.com/t/emulation-flash-configurations-not-working-with-jetpack-6-0/314288 "2024-11-21T20:38:40Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![user84666](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@user84666](https://forums.developer.nvidia.com/u/user84666)\ **Post date:** [November 21, 2024, 8:38pm UTC](https://forums.developer.nvidia.com/t/emulation-flash-configurations-not-working-with-jetpack-6-0/314288/1 "2024-11-21T20:38:40Z")
Hi, we tried flashing our Orin-Devkit with the following command: `sudo ./flash.sh jetson-agx-orin-devkit-as-jao-32gb internal` but when checking e.g. with `tegrastats`, we see that 12 cores are active (which should be only 8 in the emulation mode): ```auto $ tegrastats 11-21-2024 17:16:39 RAM 2059/30697MB (lfb 5x4MB) SWAP 0/15349MB (cached 0MB) CPU [0%@729,0%@729,0%@729,0%@729,0%@729,0%@729,0%@729,0%@729,0%@729,0%@729,0%@729,0%@729] GR3D_FREQ 0% cpu@44.5C tboard@31.5C soc2@41.687C tdiode@36.25C soc0@41.75C tj@44.593C soc1@41.562C VDD_GPU_SOC 2379mW/2379mW VDD_CPU_CV 396mW/396mW VIN_SYS_5V0 3824mW/3824mW VDDQ_VDD2_1V8AO 402mW/402mW ``` also other tools, like jtop are showing 12 active cores. `/boot/extlinux/extlinux.conf` shows the correct configuration though: ```auto TIMEOUT 30 DEFAULT primary MENU TITLE L4T boot options LABEL primary MENU LABEL primary kernel LINUX /boot/Image INITRD /boot/initrd APPEND ${cbootargs} root=PARTUUID=d8da58d9-f573-4d70-916a-f2a869e5f66e rw rootwait rootfstype=ext4 mminit_loglevel=4 console=ttyTCU0,115200 console=ttyAMA0,115200 firmware_class.path=/etc/firmware fbcon=map:0 net.ifnames=0 nospectre_bhb video=efifb:off console=tty0 nr_cpus=8 ``` also, `/etc/nv_boot_control.conf` shows, that the emulation mode should be active: ```auto $ cat /etc/nv_boot_control.conf TNSPEC 3701-500-0000-J.0-1-1-jetson-agx-orin-devkit-as-jao-32gb- COMPATIBLE_SPEC 3701-300-0000--1--jetson-agx-orin-devkit-as-jao-32gb- TEGRA_BOOT_STORAGE mmcblk0 TEGRA_CHIPID 0x23 TEGRA_OTA_BOOT_DEVICE /dev/mtdblock0 TEGRA_OTA_GPT_DEVICE /dev/mtdblock0` ``` Do you have any advice what the problem might be here? We need to configure the Orin-devkit to have the same hardware capabilities as the 32GB Module (regarding GPU and CPU). We used the Orin devkit in the past with Jetpack 5 for example, to build engines and deployed them successfully on the 32GB module, and we would like to do this with Jetpack 6.0 as well. ---
**Author:** ![carolyuu](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/carolyuu/32/14043_2.png) [@carolyuu](https://forums.developer.nvidia.com/u/carolyuu)\ **Post date:** [November 21, 2024, 9:00pm UTC](https://forums.developer.nvidia.com/t/emulation-flash-configurations-not-working-with-jetpack-6-0/314288/2 "2024-11-21T21:00:12Z")
Hi, Here are some suggestions for the common issues: #### 1. Performance Please run the below command before benchmarking deep learning use case: ```auto $ sudo nvpmodel -m 0 $ sudo jetson_clocks ``` #### 2. Installation Installation guide of deep learning frameworks on Jetson: - TensorFlow: [Installing TensorFlow for Jetson Platform - NVIDIA Docs](https://docs.nvidia.com/deeplearning/frameworks/install-tf-jetson-platform/index.html) - PyTorch: [Installing PyTorch for Jetson Platform - NVIDIA Docs](https://docs.nvidia.com/deeplearning/frameworks/install-pytorch-jetson-platform/index.html) We also have containers that have frameworks preinstalled: [GPU-optimized AI, Machine Learning, & HPC Software | NVIDIA NGC](https://catalog.ngc.nvidia.com/containers?filters=&orderBy=scoreDESC&query=l4t) #### 3. Tutorial Startup deep learning tutorial: - Jetson-inference: [Hello AI World guide to deploying deep-learning inference networks and deep vision primitives with TensorRT and NVIDIA Jetson](https://github.com/dusty-nv/jetson-inference) - TensorRT sample: [Making sure you're not a bot!](https://elinux.org/Jetson/L4T/TRT_Customized_Example#TensorRT_Python) #### 4. Report issue If these suggestions don’t help and you want to report an issue to us, please attach the model, command/step, and the customized app (if any) with us to reproduce locally. Thanks! ---
**Author:** ![user84666](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@user84666](https://forums.developer.nvidia.com/u/user84666)\ **Post date:** [November 21, 2024, 9:19pm UTC](https://forums.developer.nvidia.com/t/emulation-flash-configurations-not-working-with-jetpack-6-0/314288/3 "2024-11-21T21:19:07Z")
Thanks for the quick response. I think there was a misunderstanding of my post above, let me try to clarify: - We have a Jetson Orin DevKit . - We want to use it to emulate a Jetson AGX Orin module 32GB, so we flashed it with Jetpack 6.0 following [Emulation Flash Configurations — NVIDIA Jetson Linux Developer Guide 1 documentation](https://docs.nvidia.com/jetson/archives/r36.3/DeveloperGuide/SD/EmulationSupport.html?#emulation-flash-configurations) with the `jetson-agx-orin-devkit-as-jao-32gb` parameter (see my post above) - This did not seem to work the same way as it did with Jetpack 5.0; after flashing with above command, we see that the DevKit still has 12 CPU cores active instead of 8 as before. So, we basically want to emulate the 32GB variant with our DevKit using Jetpack6.0. Are we missing a step? Or does it work differently now? ---
**Author:** ![KevinFFF](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/kevinfff/32/15508_2.png) [@KevinFFF](https://forums.developer.nvidia.com/u/KevinFFF)\ **Post date:** [November 22, 2024, 2:18am UTC](https://forums.developer.nvidia.com/t/emulation-flash-configurations-not-working-with-jetpack-6-0/314288/5 "2024-11-22T02:18:54Z")
Hi user84666, > [@user84666](#): > > We used the Orin devkit in the past with Jetpack 5 for example, to build engines and deployed them successfully on the 32GB module, and we would like to do this with Jetpack 6.0 as well. Do you mean that you have only AGX Orin 64GB module but you want to know the status for AGX Orin 32GB so that you are using jetson-agx-orin-devkit-as-jao-32gb board config? > [@user84666](#): > > we see that the DevKit still has 12 CPU cores active instead of 8 as before. Have you also tried to configure them in nvpmodel configuration(_/etc/nvpmodel.conf_)? Please share the result of `# nvpmodel -q --verbose` on your board. ---
**Author:** ![user84666](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@user84666](https://forums.developer.nvidia.com/u/user84666)\ **Post date:** [November 22, 2024, 7:30am UTC](https://forums.developer.nvidia.com/t/emulation-flash-configurations-not-working-with-jetpack-6-0/314288/6 "2024-11-22T07:30:00Z")
Sorry, I was mistaken on the hardware model we have (I’ll edit it in my posts above as well). We have an older **AGX Orin DevKit** , which in fact has only 32GB. We want to use that to emulate a Jetson AGX Orin 32GB **module** , as described in [Emulation Flash Configurations — NVIDIA Jetson Linux Developer Guide 1 documentation](https://docs.nvidia.com/jetson/archives/r36.3/DeveloperGuide/SD/EmulationSupport.html?#emulation-flash-configurations). Here the output of `nvpmodel -q --verbose`. This is after we flashed it with `sudo ./flash.sh jetson-agx-orin-devkit-as-jao-32gb internal` as per the documentation linked in my previous paragraph: ```auto $ nvpmodel -q --verbose NVPM VERB: Config file: /etc/nvpmodel.conf NVPM VERB: parsing done for /etc/nvpmodel.conf NVPM VERB: Current mode: NV Power Mode: MAXN 0 NVPM VERB: PARAM CPU_ONLINE: ARG CORE_0: PATH /sys/devices/system/cpu/cpu0/online: REAL_VAL: 1 CONF_VAL: 1 NVPM VERB: PARAM CPU_ONLINE: ARG CORE_1: PATH /sys/devices/system/cpu/cpu1/online: REAL_VAL: 1 CONF_VAL: 1 NVPM VERB: PARAM CPU_ONLINE: ARG CORE_2: PATH /sys/devices/system/cpu/cpu2/online: REAL_VAL: 1 CONF_VAL: 1 NVPM VERB: PARAM CPU_ONLINE: ARG CORE_3: PATH /sys/devices/system/cpu/cpu3/online: REAL_VAL: 1 CONF_VAL: 1 NVPM VERB: PARAM CPU_ONLINE: ARG CORE_4: PATH /sys/devices/system/cpu/cpu4/online: REAL_VAL: 1 CONF_VAL: 1 NVPM VERB: PARAM CPU_ONLINE: ARG CORE_5: PATH /sys/devices/system/cpu/cpu5/online: REAL_VAL: 1 CONF_VAL: 1 NVPM VERB: PARAM CPU_ONLINE: ARG CORE_6: PATH /sys/devices/system/cpu/cpu6/online: REAL_VAL: 1 CONF_VAL: 1 NVPM VERB: PARAM CPU_ONLINE: ARG CORE_7: PATH /sys/devices/system/cpu/cpu7/online: REAL_VAL: 1 CONF_VAL: 1 NVPM VERB: PARAM TPC_POWER_GATING: ARG TPC_PG_MASK: PATH /sys/devices/platform/gpu.0/tpc_pg_mask: REAL_VAL: 128 CONF_VAL: 128 NVPM VERB: PARAM GPU_POWER_CONTROL_ENABLE: ARG GPU_PWR_CNTL_EN: PATH /sys/devices/platform/gpu.0/power/control: REAL_VAL: auto CONF_VAL: on NVPM VERB: PARAM CPU_A78_0: ARG MIN_FREQ: PATH /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq: REAL_VAL: 729600 CONF_VAL: 729600 NVPM VERB: PARAM CPU_A78_0: ARG MAX_FREQ: PATH /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq: REAL_VAL: 2188800 CONF_VAL: 9223372036854775807 NVPM VERB: PARAM CPU_A78_1: ARG MIN_FREQ: PATH /sys/devices/system/cpu/cpu4/cpufreq/scaling_min_freq: REAL_VAL: 729600 CONF_VAL: 729600 NVPM VERB: PARAM CPU_A78_1: ARG MAX_FREQ: PATH /sys/devices/system/cpu/cpu4/cpufreq/scaling_max_freq: REAL_VAL: 2188800 CONF_VAL: 9223372036854775807 NVPM VERB: PARAM GPU: ARG MIN_FREQ: PATH /sys/devices/platform/17000000.gpu/devfreq_dev/min_freq: REAL_VAL: 306000000 CONF_VAL: 0 NVPM VERB: PARAM GPU: ARG MAX_FREQ: PATH /sys/devices/platform/17000000.gpu/devfreq_dev/max_freq: REAL_VAL: 930750000 CONF_VAL: 9223372036854775807 NVPM VERB: PARAM GPU_POWER_CONTROL_DISABLE: ARG GPU_PWR_CNTL_DIS: PATH /sys/devices/platform/gpu.0/power/control: REAL_VAL: auto CONF_VAL: auto NVPM VERB: PARAM EMC: ARG MAX_FREQ: PATH /sys/kernel/nvpmodel_clk_cap/emc: REAL_VAL: 3199000000 CONF_VAL: 9223372036854775807 NVPM VERB: PARAM DLA0_CORE: ARG MAX_FREQ: PATH /sys/devices/platform/bus@0/13e00000.host1x/15880000.nvdla0/clk_cap/dla0_core: REAL_VAL: 1408000000 CONF_VAL: 9223372036854775807 NVPM VERB: PARAM DLA1_CORE: ARG MAX_FREQ: PATH /sys/devices/platform/bus@0/13e00000.host1x/158c0000.nvdla1/clk_cap/dla1_core: REAL_VAL: 1408000000 CONF_VAL: 9223372036854775807 NVPM VERB: PARAM DLA0_FALCON: ARG MAX_FREQ: PATH /sys/devices/platform/bus@0/13e00000.host1x/15880000.nvdla0/clk_cap/dla0_falcon: REAL_VAL: 742400000 CONF_VAL: 9223372036854775807 NVPM VERB: PARAM DLA1_FALCON: ARG MAX_FREQ: PATH /sys/devices/platform/bus@0/13e00000.host1x/158c0000.nvdla1/clk_cap/dla1_falcon: REAL_VAL: 742400000 CONF_VAL: 9223372036854775807 NVPM VERB: PARAM PVA0_VPS: ARG MAX_FREQ: PATH /sys/devices/platform/bus@0/13e00000.host1x/16000000.pva0/clk_cap/pva0_vps: REAL_VAL: 1190400000 CONF_VAL: 9223372036854775807 NVPM VERB: PARAM PVA0_AXI: ARG MAX_FREQ: PATH /sys/devices/platform/bus@0/13e00000.host1x/16000000.pva0/clk_cap/pva0_cpu_axi: REAL_VAL: 857600000 CONF_VAL: 9223372036854775807 ``` There are indeed only 8 cores listed, however `jtop`, `tegrastats` (see my post above) `htop` report 12 active cores. Does this mean the emulation mode is already active? Or is some additional step needed? When we did the emulation flashing with JetPack 5, it showed us only 8 cores in `jtop`, without having to reconfigure the `nvpmodel` config. ---
**Author:** ![user84666](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@user84666](https://forums.developer.nvidia.com/u/user84666)\ **Post date:** [November 29, 2024, 10:39am UTC](https://forums.developer.nvidia.com/t/emulation-flash-configurations-not-working-with-jetpack-6-0/314288/7 "2024-11-29T10:39:58Z")
Are we the only ones that have a problem with the emulation mode on Jetpack6? It seems like a pretty important feature to have for the DevKits. ---
**Author:** ![KevinFFF](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/kevinfff/32/15508_2.png) [@KevinFFF](https://forums.developer.nvidia.com/u/KevinFFF)\ **Post date:** [December 1, 2024, 12:40pm UTC](https://forums.developer.nvidia.com/t/emulation-flash-configurations-not-working-with-jetpack-6-0/314288/8 "2024-12-01T12:40:14Z")
> [@user84666](#): > > We have an older **AGX Orin DevKit** , which in fact has only 32GB. > > We want to use that to emulate a Jetson AGX Orin 32GB **module** , Sorry that I’m not clear about this. If your AGX Orin devkit has AGX Orin 32GB module, why you want to use `jetson-agx-orin-devkit-as-jao-32gb` as board config. Please share the result of `cat /etc/nv_boot_control.conf` for further check. > [@user84666](#): > > Are we the only ones that have a problem with the emulation mode on Jetpack6? Not too many users do this and we don’t receive similar issue like it so that we would like to also verify it locally. ---
**Author:** ![WayneWWW](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/waynewww/32/14043_2.png) [@WayneWWW](https://forums.developer.nvidia.com/u/WayneWWW)\ **Post date:** [December 1, 2024, 3:05pm UTC](https://forums.developer.nvidia.com/t/emulation-flash-configurations-not-working-with-jetpack-6-0/314288/10 "2024-12-01T15:05:40Z")
Hi, Actually the emulation config is seldom in use as all the modules are released already. We will check this on our side. ---
**Author:** ![WayneWWW](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/waynewww/32/14043_2.png) [@WayneWWW](https://forums.developer.nvidia.com/u/WayneWWW)\ **Post date:** [December 2, 2024, 11:44am UTC](https://forums.developer.nvidia.com/t/emulation-flash-configurations-not-working-with-jetpack-6-0/314288/12 "2024-12-02T11:44:11Z")
Hi, It seems we are not able to reproduce this issue on our side with “jetson-agx-orin-devkit-as-jao-32gb”. What is the result of cat /etc/nv\_boot\_control.conf for your board if you flash the common use board config? ---
**Author:** ![user84666](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@user84666](https://forums.developer.nvidia.com/u/user84666)\ **Post date:** [December 4, 2024, 8:57am UTC](https://forums.developer.nvidia.com/t/emulation-flash-configurations-not-working-with-jetpack-6-0/314288/13 "2024-12-04T08:57:33Z")
Hi @KevinFFF, hi @WayneWWW, thanks for the replies! The AGX Orin devkit with 32 GB memory has the same hardware capabilities (despite of the memory) as the 64GB module. The AGX Orin devkit has e.g., 12 CPU cores (instead of 8), 2048 tensor cores (instead of 1792), higher GPU frequencies, and so on. See [NVIDIA Jetson AGX Orin](https://www.nvidia.com/en-us/autonomous-machines/embedded-systems/jetson-orin/) We want to have the same hardware emulated as we are building into our robots. We use the devkit for instance to evaluate the performance of our models in simulation. If the DevKit is faster than the modules on the robots, we might get better results as we will have in reality afterwards. That is why is is so important to us to have the same hardware capabilities emulated on the devkit. Regarding the results of `cat /etc/nv_boot_control.conf`: I already shared them in the initial post, here once again the results: ```auto $ cat /etc/nv_boot_control.conf TNSPEC 3701-500-0000-J.0-1-1-jetson-agx-orin-devkit-as-jao-32gb- COMPATIBLE_SPEC 3701-300-0000--1--jetson-agx-orin-devkit-as-jao-32gb- TEGRA_BOOT_STORAGE mmcblk0 TEGRA_CHIPID 0x23 TEGRA_OTA_BOOT_DEVICE /dev/mtdblock0 TEGRA_OTA_GPT_DEVICE /dev/mtdblock0 ``` ---
**Author:** ![WayneWWW](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/waynewww/32/14043_2.png) [@WayneWWW](https://forums.developer.nvidia.com/u/WayneWWW)\ **Post date:** [December 4, 2024, 9:06am UTC](https://forums.developer.nvidia.com/t/emulation-flash-configurations-not-working-with-jetpack-6-0/314288/14 "2024-12-04T09:06:49Z")
Hi, No, I mean what is the result if you don’t flash with “jetson-agx-orin-devkit-as-jao-32gb-”. I didn’t ask you to share a result based on jetson-agx-orin-devkit-as-jao-32gb. I want the original board config. ---
**Author:** ![WayneWWW](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/waynewww/32/14043_2.png) [@WayneWWW](https://forums.developer.nvidia.com/u/WayneWWW)\ **Post date:** [December 4, 2024, 9:07am UTC](https://forums.developer.nvidia.com/t/emulation-flash-configurations-not-working-with-jetpack-6-0/314288/15 "2024-12-04T09:07:52Z")
And once you shared out the result, please also share me the **flash log** of “jetson-agx-orin-devkit-as-jao-32gb” for this module. Attach the log as whole text file and put it here. ---
**Author:** ![user84666](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@user84666](https://forums.developer.nvidia.com/u/user84666)\ **Post date:** [December 9, 2024, 4:23pm UTC](https://forums.developer.nvidia.com/t/emulation-flash-configurations-not-working-with-jetpack-6-0/314288/16 "2024-12-09T16:23:04Z")
Hi @WayneWWW, sorry for the confusion, here is the output with the original board config: ```auto $ cat /etc/nv_boot_control.conf TNSPEC 3701-500-0000-J.0-1-1-jetson-agx-orin-devkit- COMPATIBLE_SPEC 3701-300-0000--1--jetson-agx-orin-devkit- TEGRA_BOOT_STORAGE mmcblk0 TEGRA_CHIPID 0x23 TEGRA_OTA_BOOT_DEVICE /dev/mtdblock0 TEGRA_OTA_GPT_DEVICE /dev/mtdblock0 ``` And here is the full log when flashing the devkit as jao-32gb: [flash\_log\_jetson-agx-orin-devkit-as-jao-32gb.txt](https://forums.developer.nvidia.com/uploads/short-url/u4AScQ9isrVQFG2Y3kcEnVkMmX0.txt) (99.8 KB) ---
**Author:** ![WayneWWW](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/waynewww/32/14043_2.png) [@WayneWWW](https://forums.developer.nvidia.com/u/WayneWWW)\ **Post date:** [December 10, 2024, 3:21am UTC](https://forums.developer.nvidia.com/t/emulation-flash-configurations-not-working-with-jetpack-6-0/314288/18 "2024-12-10T03:21:16Z")
Do you have the dmesg to share? ---
**Author:** ![user84666](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@user84666](https://forums.developer.nvidia.com/u/user84666)\ **Post date:** [December 10, 2024, 10:06am UTC](https://forums.developer.nvidia.com/t/emulation-flash-configurations-not-working-with-jetpack-6-0/314288/19 "2024-12-10T10:06:15Z")
Sure: [dmesg.log](https://forums.developer.nvidia.com/uploads/short-url/gIcI3hvN4EhKavyGe8dCucBHKIY.log) (63.2 KB) ---
**Author:** ![WayneWWW](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/waynewww/32/14043_2.png) [@WayneWWW](https://forums.developer.nvidia.com/u/WayneWWW)\ **Post date:** [December 10, 2024, 10:08am UTC](https://forums.developer.nvidia.com/t/emulation-flash-configurations-not-working-with-jetpack-6-0/314288/20 "2024-12-10T10:08:05Z")
there should be a kernel cmdline of 8 cores cpu. But didn’t show up in your log. ```auto 33 OVERLAY_DTB_FILE+=",tegra234-p3737-0000+p3701-0000-as-p3701-0004.dtbo"; 34 # Select the Base DTB based on SKU 35 if ["${board_sku}" = "0000"]; then 36 BPFDTB_FILE="tegra234-bpmp-3701-0000-as-3701-0004-3737-0000.dtb"; 37 CMDLINE_ADD+=" nr_cpus=8"; ``` ---
**Author:** ![user84666](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@user84666](https://forums.developer.nvidia.com/u/user84666)\ **Post date:** [December 10, 2024, 10:22am UTC](https://forums.developer.nvidia.com/t/emulation-flash-configurations-not-working-with-jetpack-6-0/314288/21 "2024-12-10T10:22:19Z")
It seems to be at least successfully added to `/boot/extlinux/extlinux.conf`: (here, I added the .txt appendix to the file, because I was not allowed to upload a .conf file, but the file ist the original `/boot/extlinux/extlinux.conf` and shows the `nr_cpus=8`) [extlinux.conf.txt](https://forums.developer.nvidia.com/uploads/short-url/vW1xdNlKMqqFlvqIjK96K7t3m6v.txt) (985 Bytes) Any idea what the issue might be? ---
**Author:** ![WayneWWW](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/waynewww/32/14043_2.png) [@WayneWWW](https://forums.developer.nvidia.com/u/WayneWWW)\ **Post date:** [December 10, 2024, 11:07am UTC](https://forums.developer.nvidia.com/t/emulation-flash-configurations-not-working-with-jetpack-6-0/314288/22 "2024-12-10T11:07:25Z")
One question. Are you sure your board is booting from eMMC but not other boot medium? ---
**Author:** ![user84666](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@user84666](https://forums.developer.nvidia.com/u/user84666)\ **Post date:** [December 10, 2024, 2:53pm UTC](https://forums.developer.nvidia.com/t/emulation-flash-configurations-not-working-with-jetpack-6-0/314288/23 "2024-12-10T14:53:29Z")
Yes, we are. We also did the same tests without NVMe. ---
**Author:** ![WayneWWW](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/waynewww/32/14043_2.png) [@WayneWWW](https://forums.developer.nvidia.com/u/WayneWWW)\ **Post date:** [December 11, 2024, 2:18am UTC](https://forums.developer.nvidia.com/t/emulation-flash-configurations-not-working-with-jetpack-6-0/314288/24 "2024-12-11T02:18:17Z")
Just to clarify the situation. Are you talking about you saw the nr\_cpus is listed in your extlinux.conf but the dmesg still does not show it? [Next page](https://forums.developer.nvidia.com/t/emulation-flash-configurations-not-working-with-jetpack-6-0/314288.md?page=2)