# Error might be timeout in USB write **URL:** \ **Category:** Jetson AGX Orin\ **Tags:** reflash\ **Created:** [March 1, 2024, 11:34am UTC](https://forums.developer.nvidia.com/t/error-might-be-timeout-in-usb-write/284646 "2024-03-01T11:34:01Z")\ **Posts on this page:** 10\ **Page:** 1
**Author:** ![younes.khadraoui](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@younes.khadraoui](https://forums.developer.nvidia.com/u/younes.khadraoui)\ **Post date:** [March 1, 2024, 11:34am UTC](https://forums.developer.nvidia.com/t/error-might-be-timeout-in-usb-write/284646/1 "2024-03-01T11:34:01Z")
Hello, I’m trying to flash my AGX Orin. The vendor provided the BSP so they validated it and it should be working. However, when launching the process, I get an error saying that it might be timeout in USB write. As suggested by others in this forum, I deactivated usb autosuspend, but still not working. Here is the full log: ```auto Full L4T Image ############################################################################### # L4T BSP Information: # R36 , REVISION: 2.0 # User release: 0.0 ############################################################################### ECID is 0x80012344705DD3E31000000016030100 # Target Board Information: # Name: jetson-agx-orin-devkit, Board Family: generic, SoC: Tegra 234, # OpMode: production, Boot Authentication: NS, # Disk encryption: disabled , ############################################################################### copying emc_fuse_dev_params(JetPack_6.0_DP_Linux_DP_JETSON_AGX_ORIN_TARGETS/Linux_for_Tegra/bootloader/generic/BCT/tegra234-br-bct-diag-boot.dts)... done. copying device_config(JetPack_6.0_DP_Linux_DP_JETSON_AGX_ORIN_TARGETS/Linux_for_Tegra/bootloader/generic/BCT/tegra234-mb1-bct-device-p3701-0000.dts)... done. copying misc_config(JetPack_6.0_DP_Linux_DP_JETSON_AGX_ORIN_TARGETS/Linux_for_Tegra/bootloader/generic/BCT/tegra234-mb1-bct-misc-p3701-0000.dts)... done. ./tegraflash.py --chip "0x23" --applet "JetPack_6.0_DP_Linux_DP_JETSON_AGX_ORIN_TARGETS/Linux_for_Tegra/bootloader/mb1_t234_prod.bin" --skipuid --cfg readinfo_t234_min_prod.xml --dev_params tegra234-br-bct-diag-boot.dts --device_config tegra234-mb1-bct-device-p3701-0000.dts --misc_config tegra234-mb1-bct-misc-p3701-0000.dts --bins "mb2_applet applet_t234.bin" --cmd "dump eeprom cvm cvm.bin; dump try_custinfo custinfo_out.bin; reboot recovery" Welcome to Tegra Flash version 1.0.0 Type ? or help for help and q or quit to exit Use ! to execute system commands [0.0224] tegrarcm_v2 --chip 0x23 0 --ismb2applet [0.0227] File rcm_state open failed [0.0229] ERROR: failed to read rcm_state [0.0229] [0.0236] tegrasign_v3.py --key None --getmode mode.txt [0.0237] Assuming zero filled SBK key [0.0232] Pre-processing config: tegra234-mb1-bct-device-p3701-0000.dts [0.0287] Pre-processing config: tegra234-mb1-bct-misc-p3701-0000.dts [0.0369] Parsing partition layout [0.0373] tegraparser_v2 --pt readinfo_t234_min_prod.xml.tmp [0.0382] Kernel DTB used: None [0.0382] WARNING: dce base dtb is not provided [0.0382] Parsing partition layout [0.0385] tegraparser_v2 --pt readinfo_t234_min_prod.xml.tmp [0.0391] Creating list of images to be signed [0.0394] tegrahost_v2 --chip 0x23 0 --partitionlayout readinfo_t234_min_prod.xml.bin --list images_list.xml zerosbk [0.0397] MB1: Nvheader already present is mb1_t234_prod_aligned.bin [0.0408] Header already present for mb1_t234_prod_aligned_sigheader.bin [0.0412] MB1: Nvheader already present is mb1_t234_prod_aligned.bin [0.0457] Header already present for mb1_t234_prod_aligned_sigheader.bin [0.0711] MB1: Nvheader already present is psc_bl1_t234_prod_aligned.bin [0.0764] Header already present for psc_bl1_t234_prod_aligned_sigheader.bin [0.0770] adding BCH for mb2_t234_aligned.bin [0.0801] MB1: Nvheader already present is psc_bl1_t234_prod_aligned.bin [0.0947] Header already present for psc_bl1_t234_prod_aligned_sigheader.bin [0.0953] adding BCH for mb2_t234_aligned.bin [0.1095] Filling MB1 storage info [0.1095] Parsing dev params for multi chains [0.1163] Generating br-bct [0.1167] Updating dev and MSS params in BR BCT [0.1167] tegrabct_v2 --dev_param tegra234-br-bct-diag-boot_cpp.dtb --brbct br_bct.cfg --chip 0x23 0 [0.1173] Updating bl info [0.1176] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x23 0 --updateblinfo readinfo_t234_min_prod.xml.bin [0.1179] WARNING: boot chain is not completed. set to 0 [0.1190] Generating signatures [0.1196] tegrasign_v3.py --key None --list images_list.xml --pubkeyhash pub_key.key --sha sha512 [0.1198] Assuming zero filled SBK key [0.1280] Warning: pub_key.key is not found [0.1276] Parsing dev params for multi chains [0.1276] Generating br-bct [0.1281] Updating dev and MSS params in BR BCT [0.1281] tegrabct_v2 --dev_param tegra234-br-bct-diag-boot_cpp.dtb --brbct br_bct.cfg --chip 0x23 0 [0.1288] Updating bl info [0.1292] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x23 0 --updateblinfo readinfo_t234_min_prod.xml.bin --updatesig images_list_signed.xml [0.1296] WARNING: boot chain is not completed. set to 0 [0.1312] Generating SHA2 Hash [0.1326] Sha saved in br_bct_BR.sha [0.1320] Get Signed section of bct [0.1323] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x23 0 --listbct bct_list.xml [0.1329] Signing BCT [0.1335] tegrasign_v3.py --key None --list bct_list.xml --pubkeyhash pub_key.key --sha sha512 [0.1337] Assuming zero filled SBK key [0.1353] Sha saved in br_bct_BR.sha [0.1355] Warning: pub_key.key is not found [0.1349] Updating BCT with signature [0.1352] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x23 0 --updatesig bct_list_signed.xml [0.1355] Offset :4608 Len :3584 [0.1360] Generating SHA2 Hash [0.1367] tegrasign_v3.py --key None --list bct_list.xml --sha sha512 [0.1368] Assuming zero filled SBK key [0.1368] Assuming zero filled SBK key [0.1385] Sha saved in br_bct_BR.sha [0.1381] Updating BCT with SHA2 Hash [0.1384] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x23 0 --updatesha bct_list_signed.xml [0.1387] Offset :4608 Len :3584 [0.1390] Offset :68 Len :8124 [0.1401] Generating coldboot mb1-bct [0.1404] tegrabct_v2 --chip 0x23 0 --mb1bct mb1_cold_boot_bct.cfg --misc tegra234-mb1-bct-misc-p3701-0000_cpp.dtb --device tegra234-mb1-bct-device-p3701-0000_cpp.dtb [0.1407] MB1-BCT version: 0.13 [0.1422] Parsing config file :tegra234-mb1-bct-device-p3701-0000_cpp.dtb [0.1424] Added Platform Config 9 data with size :- 100 [0.1424] [0.1424] Updating mb1-bct with firmware information [0.1427] tegrabct_v2 --chip 0x23 0 --mb1bct mb1_cold_boot_bct_MB1.bct --updatefwinfo readinfo_t234_min_prod.xml.bin [0.1440] tegrahost_v2 --chip 0x23 0 --align mb1_cold_boot_bct_MB1_aligned.bct [0.1447] tegrahost_v2 --chip 0x23 0 --magicid MBCT --appendsigheader mb1_cold_boot_bct_MB1_aligned.bct zerosbk [0.1450] adding BCH for mb1_cold_boot_bct_MB1_aligned.bct [0.1465] tegrasign_v3.py --key None --list mb1_cold_boot_bct_MB1_aligned_sigheader.bct_list.xml --pubkeyhash pub_key.key --sha sha512 [0.1467] Assuming zero filled SBK key [0.1479] Warning: pub_key.key is not found [0.1477] tegrahost_v2 --chip 0x23 0 --updatesigheader mb1_cold_boot_bct_MB1_aligned_sigheader.bct.encrypt mb1_cold_boot_bct_MB1_aligned_sigheader.bct.hash zerosbk [0.1484] Generating recovery mb1-bct [0.1488] tegrabct_v2 --chip 0x23 0 --mb1bct mb1_bct.cfg --misc tegra234-mb1-bct-misc-p3701-0000_cpp.dtb --device tegra234-mb1-bct-device-p3701-0000_cpp.dtb [0.1491] MB1-BCT version: 0.13 [0.1506] Parsing config file :tegra234-mb1-bct-device-p3701-0000_cpp.dtb [0.1509] Added Platform Config 9 data with size :- 100 [0.1509] [0.1509] Updating mb1-bct with firmware information [0.1512] tegrabct_v2 --chip 0x23 0 --mb1bct mb1_bct_MB1.bct --recov --updatefwinfo readinfo_t234_min_prod.xml.bin [0.1523] tegrahost_v2 --chip 0x23 0 --align mb1_bct_MB1_aligned.bct [0.1526] Generating SHA2 Hash for mb1bct [0.1542] Sha saved in mb1_bct_MB1_aligned.sha [0.1539] tegrahost_v2 --chip 0x23 0 --magicid MBCT --appendsigheader mb1_bct_MB1_aligned.bct zerosbk [0.1542] adding BCH for mb1_bct_MB1_aligned.bct [0.1555] tegrasign_v3.py --key None --list mb1_bct_MB1_aligned_sigheader.bct_list.xml --pubkeyhash pub_key.key --sha sha512 [0.1556] Assuming zero filled SBK key [0.1568] Warning: pub_key.key is not found [0.1565] tegrahost_v2 --chip 0x23 0 --updatesigheader mb1_bct_MB1_aligned_sigheader.bct.encrypt mb1_bct_MB1_aligned_sigheader.bct.hash zerosbk [0.1573] Error: Skip generating mem_bct because sdram_config is not defined [0.1573] Error: Skip generating mem_bct because sdram_config is not defined [0.1573] Copying signatures [0.1576] tegrahost_v2 --chip 0x23 0 --partitionlayout readinfo_t234_min_prod.xml.bin --updatesig images_list_signed.xml [0.1627] mb1_t234_prod_aligned_sigheader.bin.encrypt filename is from images_list [0.1629] psc_bl1_t234_prod_aligned_sigheader.bin.encrypt filename is from images_list [0.1629] Boot Rom communication [0.1633] tegrarcm_v2 --new_session --chip 0x23 0 --uid --download bct_br br_bct_BR.bct --download mb1 mb1_t234_prod_aligned_sigheader.bin.encrypt --download psc_bl1 psc_bl1_t234_prod_aligned_sigheader.bin.encrypt --download bct_mb1 mb1_bct_MB1_sigheader.bct.encrypt [0.1637] BR_CID: 0x80012344705DD3E31000000016030100 [0.1645] Sending bct_br [0.1646] ERROR: might be timeout in USB write. Error: Return value 3 Command tegrarcm_v2 --new_session --chip 0x23 0 --uid --download bct_br br_bct_BR.bct --download mb1 mb1_t234_prod_aligned_sigheader.bin.encrypt --download psc_bl1 psc_bl1_t234_prod_aligned_sigheader.bin.encrypt --download bct_mb1 mb1_bct_MB1_sigheader.bct.encrypt Reading board information failed. ``` Unfortunately, I saw in this forum that the error is random and no solution was proposed. Maybe someone was able to solve it from that time. ---
**Author:** ![WayneWWW](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/waynewww/32/14043_2.png) [@WayneWWW](https://forums.developer.nvidia.com/u/WayneWWW)\ **Post date:** [March 1, 2024, 2:53pm UTC](https://forums.developer.nvidia.com/t/error-might-be-timeout-in-usb-write/284646/2 "2024-03-01T14:53:45Z")
After you disable the auto suspend, you need to put the board into recovery mode again and reconnect the cable again. Did you do that or not? ---
**Author:** ![younes.khadraoui](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@younes.khadraoui](https://forums.developer.nvidia.com/u/younes.khadraoui)\ **Post date:** [March 1, 2024, 3:31pm UTC](https://forums.developer.nvidia.com/t/error-might-be-timeout-in-usb-write/284646/3 "2024-03-01T15:31:19Z")
Thank you @WayneWWW . I now have another error: ```auto Full L4T Image ############################################################################### # L4T BSP Information: # R36 , REVISION: 2.0 # User release: 0.0 ############################################################################### ECID is 0x80012344705DD3E31000000016030100 # Target Board Information: # Name: jetson-agx-orin-devkit, Board Family: generic, SoC: Tegra 234, # OpMode: production, Boot Authentication: NS, # Disk encryption: disabled , ############################################################################### copying emc_fuse_dev_params(/path/JetPack_6.0_DP_Linux_DP_JETSON_AGX_ORIN_TARGETS/Linux_for_Tegra/bootloader/generic/BCT/tegra234-br-bct-diag-boot.dts)... done. copying device_config(/path/JetPack_6.0_DP_Linux_DP_JETSON_AGX_ORIN_TARGETS/Linux_for_Tegra/bootloader/generic/BCT/tegra234-mb1-bct-device-p3701-0000.dts)... done. copying misc_config(/path/JetPack_6.0_DP_Linux_DP_JETSON_AGX_ORIN_TARGETS/Linux_for_Tegra/bootloader/generic/BCT/tegra234-mb1-bct-misc-p3701-0000.dts)... done. ./tegraflash.py --chip "0x23" --applet "/path/JetPack_6.0_DP_Linux_DP_JETSON_AGX_ORIN_TARGETS/Linux_for_Tegra/bootloader/mb1_t234_prod.bin" --skipuid --cfg readinfo_t234_min_prod.xml --dev_params tegra234-br-bct-diag-boot.dts --device_config tegra234-mb1-bct-device-p3701-0000.dts --misc_config tegra234-mb1-bct-misc-p3701-0000.dts --bins "mb2_applet applet_t234.bin" --cmd "dump eeprom cvm cvm.bin; dump try_custinfo custinfo_out.bin; reboot recovery" Welcome to Tegra Flash version 1.0.0 Type ? or help for help and q or quit to exit Use ! to execute system commands [0.0200] tegrarcm_v2 --chip 0x23 0 --ismb2applet [0.0203] File rcm_state open failed [0.0205] ERROR: failed to read rcm_state [0.0205] [0.0212] tegrasign_v3.py --key None --getmode mode.txt [0.0213] Assuming zero filled SBK key [0.0208] Pre-processing config: tegra234-mb1-bct-device-p3701-0000.dts [0.0265] Pre-processing config: tegra234-mb1-bct-misc-p3701-0000.dts [0.0348] Parsing partition layout [0.0352] tegraparser_v2 --pt readinfo_t234_min_prod.xml.tmp [0.0361] Kernel DTB used: None [0.0361] WARNING: dce base dtb is not provided [0.0361] Parsing partition layout [0.0365] tegraparser_v2 --pt readinfo_t234_min_prod.xml.tmp [0.0371] Creating list of images to be signed [0.0374] tegrahost_v2 --chip 0x23 0 --partitionlayout readinfo_t234_min_prod.xml.bin --list images_list.xml zerosbk [0.0377] MB1: Nvheader already present is mb1_t234_prod_aligned.bin [0.0390] Header already present for mb1_t234_prod_aligned_sigheader.bin [0.0394] MB1: Nvheader already present is mb1_t234_prod_aligned.bin [0.0438] Header already present for mb1_t234_prod_aligned_sigheader.bin [0.0446] MB1: Nvheader already present is psc_bl1_t234_prod_aligned.bin [0.0490] Header already present for psc_bl1_t234_prod_aligned_sigheader.bin [0.0495] adding BCH for mb2_t234_aligned.bin [0.0517] MB1: Nvheader already present is psc_bl1_t234_prod_aligned.bin [0.0631] Header already present for psc_bl1_t234_prod_aligned_sigheader.bin [0.0636] adding BCH for mb2_t234_aligned.bin [0.0771] Filling MB1 storage info [0.0771] Parsing dev params for multi chains [0.0831] Generating br-bct [0.0834] Updating dev and MSS params in BR BCT [0.0835] tegrabct_v2 --dev_param tegra234-br-bct-diag-boot_cpp.dtb --brbct br_bct.cfg --chip 0x23 0 [0.0841] Updating bl info [0.0845] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x23 0 --updateblinfo readinfo_t234_min_prod.xml.bin [0.0848] WARNING: boot chain is not completed. set to 0 [0.0856] Generating signatures [0.0863] tegrasign_v3.py --key None --list images_list.xml --pubkeyhash pub_key.key --sha sha512 [0.0865] Assuming zero filled SBK key [0.0949] Warning: pub_key.key is not found [0.0944] Parsing dev params for multi chains [0.0945] Generating br-bct [0.0948] Updating dev and MSS params in BR BCT [0.0948] tegrabct_v2 --dev_param tegra234-br-bct-diag-boot_cpp.dtb --brbct br_bct.cfg --chip 0x23 0 [0.0954] Updating bl info [0.0957] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x23 0 --updateblinfo readinfo_t234_min_prod.xml.bin --updatesig images_list_signed.xml [0.0961] WARNING: boot chain is not completed. set to 0 [0.0980] Generating SHA2 Hash [0.0994] Sha saved in br_bct_BR.sha [0.0988] Get Signed section of bct [0.0992] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x23 0 --listbct bct_list.xml [0.0997] Signing BCT [0.1004] tegrasign_v3.py --key None --list bct_list.xml --pubkeyhash pub_key.key --sha sha512 [0.1006] Assuming zero filled SBK key [0.1022] Sha saved in br_bct_BR.sha [0.1024] Warning: pub_key.key is not found [0.1018] Updating BCT with signature [0.1021] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x23 0 --updatesig bct_list_signed.xml [0.1024] Offset :4608 Len :3584 [0.1028] Generating SHA2 Hash [0.1034] tegrasign_v3.py --key None --list bct_list.xml --sha sha512 [0.1036] Assuming zero filled SBK key [0.1036] Assuming zero filled SBK key [0.1054] Sha saved in br_bct_BR.sha [0.1050] Updating BCT with SHA2 Hash [0.1053] tegrabct_v2 --brbct br_bct_BR.bct --chip 0x23 0 --updatesha bct_list_signed.xml [0.1057] Offset :4608 Len :3584 [0.1061] Offset :68 Len :8124 [0.1062] Generating coldboot mb1-bct [0.1064] tegrabct_v2 --chip 0x23 0 --mb1bct mb1_cold_boot_bct.cfg --misc tegra234-mb1-bct-misc-p3701-0000_cpp.dtb --device tegra234-mb1-bct-device-p3701-0000_cpp.dtb [0.1067] MB1-BCT version: 0.13 [0.1083] Parsing config file :tegra234-mb1-bct-device-p3701-0000_cpp.dtb [0.1085] Added Platform Config 9 data with size :- 100 [0.1085] [0.1086] Updating mb1-bct with firmware information [0.1089] tegrabct_v2 --chip 0x23 0 --mb1bct mb1_cold_boot_bct_MB1.bct --updatefwinfo readinfo_t234_min_prod.xml.bin [0.1099] tegrahost_v2 --chip 0x23 0 --align mb1_cold_boot_bct_MB1_aligned.bct [0.1106] tegrahost_v2 --chip 0x23 0 --magicid MBCT --appendsigheader mb1_cold_boot_bct_MB1_aligned.bct zerosbk [0.1108] adding BCH for mb1_cold_boot_bct_MB1_aligned.bct [0.1121] tegrasign_v3.py --key None --list mb1_cold_boot_bct_MB1_aligned_sigheader.bct_list.xml --pubkeyhash pub_key.key --sha sha512 [0.1122] Assuming zero filled SBK key [0.1133] Warning: pub_key.key is not found [0.1132] tegrahost_v2 --chip 0x23 0 --updatesigheader mb1_cold_boot_bct_MB1_aligned_sigheader.bct.encrypt mb1_cold_boot_bct_MB1_aligned_sigheader.bct.hash zerosbk [0.1140] Generating recovery mb1-bct [0.1143] tegrabct_v2 --chip 0x23 0 --mb1bct mb1_bct.cfg --misc tegra234-mb1-bct-misc-p3701-0000_cpp.dtb --device tegra234-mb1-bct-device-p3701-0000_cpp.dtb [0.1146] MB1-BCT version: 0.13 [0.1161] Parsing config file :tegra234-mb1-bct-device-p3701-0000_cpp.dtb [0.1163] Added Platform Config 9 data with size :- 100 [0.1163] [0.1163] Updating mb1-bct with firmware information [0.1166] tegrabct_v2 --chip 0x23 0 --mb1bct mb1_bct_MB1.bct --recov --updatefwinfo readinfo_t234_min_prod.xml.bin [0.1178] tegrahost_v2 --chip 0x23 0 --align mb1_bct_MB1_aligned.bct [0.1182] Generating SHA2 Hash for mb1bct [0.1196] Sha saved in mb1_bct_MB1_aligned.sha [0.1193] tegrahost_v2 --chip 0x23 0 --magicid MBCT --appendsigheader mb1_bct_MB1_aligned.bct zerosbk [0.1196] adding BCH for mb1_bct_MB1_aligned.bct [0.1211] tegrasign_v3.py --key None --list mb1_bct_MB1_aligned_sigheader.bct_list.xml --pubkeyhash pub_key.key --sha sha512 [0.1212] Assuming zero filled SBK key [0.1225] Warning: pub_key.key is not found [0.1223] tegrahost_v2 --chip 0x23 0 --updatesigheader mb1_bct_MB1_aligned_sigheader.bct.encrypt mb1_bct_MB1_aligned_sigheader.bct.hash zerosbk [0.1230] Error: Skip generating mem_bct because sdram_config is not defined [0.1231] Error: Skip generating mem_bct because sdram_config is not defined [0.1231] Copying signatures [0.1234] tegrahost_v2 --chip 0x23 0 --partitionlayout readinfo_t234_min_prod.xml.bin --updatesig images_list_signed.xml [0.1283] mb1_t234_prod_aligned_sigheader.bin.encrypt filename is from images_list [0.1285] psc_bl1_t234_prod_aligned_sigheader.bin.encrypt filename is from images_list [0.1285] Boot Rom communication [0.1288] tegrarcm_v2 --new_session --chip 0x23 0 --uid --download bct_br br_bct_BR.bct --download mb1 mb1_t234_prod_aligned_sigheader.bin.encrypt --download psc_bl1 psc_bl1_t234_prod_aligned_sigheader.bin.encrypt --download bct_mb1 mb1_bct_MB1_sigheader.bct.encrypt [0.1291] BR_CID: 0x80012344705DD3E31000000016030100 [0.1300] Sending bct_br [0.1301] Sending mb1 [0.1304] Sending psc_bl1 [0.1408] Sending bct_mb1 [0.1463] Boot Rom communication completed [0.1471] tegrahost_v2 --chip 0x23 0 --align applet_t234_aligned.bin [0.1477] tegrahost_v2 --chip 0x23 0 --magicid MB2A --appendsigheader applet_t234_aligned.bin zerosbk [0.1480] adding BCH for applet_t234_aligned.bin [0.1582] tegrasign_v3.py --key None --list applet_t234_aligned_sigheader.bin_list.xml --pubkeyhash pub_key.key --sha sha512 [0.1583] Assuming zero filled SBK key [0.1598] Warning: pub_key.key is not found [0.1596] tegrahost_v2 --chip 0x23 0 --updatesigheader applet_t234_aligned_sigheader.bin.encrypt applet_t234_aligned_sigheader.bin.hash zerosbk [0.1608] Sending mb2_applet... [0.1612] tegrarcm_v2 --chip 0x23 0 --pollbl --download applet applet_t234_sigheader.bin.encrypt [0.1615] BL: version 1.4.0.1-t234-54845784-08e631ca last_boot_error: 0 [0.3716] Sending applet [0.4805] completed [0.4815] tegrarcm_v2 --chip 0x23 0 --ismb2applet [0.4823] MB2 Applet version 01.00.0000 [0.6695] tegrarcm_v2 --chip 0x23 0 --ismb2applet [0.6704] MB2 Applet version 01.00.0000 [0.6740] Retrieving board information [0.6748] tegrarcm_v2 --chip 0x23 0 --oem platformdetails chip chip_info.bin [0.6758] MB2 Applet version 01.00.0000 [0.6787] Saved platform info in chip_info.bin [0.6844] Chip minor revision: 1 [0.6849] Bootrom revision: 0x7 [0.6849] Ram code: 0x0 [0.6849] Chip sku: 0xd2 [0.6849] Chip Sample: prod [0.6849] [0.6853] Retrieving EEPROM data [0.6854] tegrarcm_v2 --oem platformdetails eeprom cvm /path/JetPack_6.0_DP_Linux_DP_JETSON_AGX_ORIN_TARGETS/Linux_for_Tegra/bootloader/cvm.bin --chip 0x23 0 [0.6864] MB2 Applet version 01.00.0000 [0.6892] Saved platform info in /path/JetPack_6.0_DP_Linux_DP_JETSON_AGX_ORIN_TARGETS/Linux_for_Tegra/bootloader/cvm.bin [0.7228] tegrarcm_v2 --chip 0x23 0 --ismb2applet [0.7235] MB2 Applet version 01.00.0000 [0.7267] tegrarcm_v2 --chip 0x23 0 --ismb2applet [0.7275] MB2 Applet version 01.00.0000 [0.7300] Dumping customer Info [0.7307] tegrarcm_v2 --chip 0x23 0 --oem dump bct tmp.bct [0.7315] MB2 Applet version 01.00.0000 [0.7344] Saved bct in tmp.bct [0.7553] tegrabct_v2 --brbct tmp.bct --chip 0x23 0 --custinfo /path/JetPack_6.0_DP_Linux_DP_JETSON_AGX_ORIN_TARGETS/Linux_for_Tegra/bootloader/custinfo_out.bin [0.7562] C[0.7568] ustomer data saved in /path/JetPack_6.0_DP_Linux_DP_JETSON_AGX_ORIN_TARGETS/Linux_for_Tegra/bootloader/custinfo_out.bin successfully [0.7569] Rebooting to recovery mode [0.7577] tegrarcm_v2 --chip 0x23 0 --ismb2 [0.7618] tegrarcm_v2 --chip 0x23 0 --ismb2applet [0.7624] MB2 Applet version 01.00.0000 [0.7650] Booting to recovery mode [0.7657] tegrarcm_v2 --chip 0x23 0 --reboot recovery [0.7665] MB2 Applet version 01.00.0000 Board ID(3701) version(500) sku(0004) revision(F.0) Chip SKU(00:00:00:D2) ramcode(00:00:00:00) fuselevel(fuselevel_production) board_FAB(500) Copy /path/JetPack_6.0_DP_Linux_DP_JETSON_AGX_ORIN_TARGETS/Linux_for_Tegra/kernel/dtb/tegra234-p3737-0000+p3701-0004-nv.dtb to /path/JetPack_6.0_DP_Linux_DP_JETSON_AGX_ORIN_TARGETS/Linux_for_Tegra/kernel/dtb/tegra234-p3737-0000+p3701-0004-nv.dtb.rec Using UUID 75a94dbf-78ee-4542-a082-ee7cde2ca81d for mounting root APP partition. copying bctfile(/path/JetPack_6.0_DP_Linux_DP_JETSON_AGX_ORIN_TARGETS/Linux_for_Tegra/bootloader/generic/BCT/tegra234-p3701-0000-sdram-l4t.dts)... done. copying minratchet_config(/path/JetPack_6.0_DP_Linux_DP_JETSON_AGX_ORIN_TARGETS/Linux_for_Tegra/bootloader/generic/BCT/tegra234-mb1-bct-ratchet-p3701-0000.dts)... done. copying device_config(/path/JetPack_6.0_DP_Linux_DP_JETSON_AGX_ORIN_TARGETS/Linux_for_Tegra/bootloader/generic/BCT/tegra234-mb1-bct-device-p3701-0000.dts)... done. copying misc_config(/path/JetPack_6.0_DP_Linux_DP_JETSON_AGX_ORIN_TARGETS/Linux_for_Tegra/bootloader/generic/BCT/tegra234-mb1-bct-misc-p3701-0000.dts)... done. copying pinmux_config(/path/JetPack_6.0_DP_Linux_DP_JETSON_AGX_ORIN_TARGETS/Linux_for_Tegra/bootloader/generic/BCT/tegra234-mb1-bct-pinmux-p3701-0000-a04.dtsi)... done. copying gpioint_config(/path/JetPack_6.0_DP_Linux_DP_JETSON_AGX_ORIN_TARGETS/Linux_for_Tegra/bootloader/generic/BCT/tegra234-mb1-bct-gpioint-p3701-0000.dts)... done. copying pmic_config(/path/JetPack_6.0_DP_Linux_DP_JETSON_AGX_ORIN_TARGETS/Linux_for_Tegra/bootloader/generic/BCT/tegra234-mb1-bct-pmic-p3701-0005.dts)... done. copying pmc_config(/path/JetPack_6.0_DP_Linux_DP_JETSON_AGX_ORIN_TARGETS/Linux_for_Tegra/bootloader/generic/BCT/tegra234-mb1-bct-padvoltage-p3701-0000-a04.dtsi)... done. copying deviceprod_config(/path/JetPack_6.0_DP_Linux_DP_JETSON_AGX_ORIN_TARGETS/Linux_for_Tegra/bootloader/generic/BCT/tegra234-mb1-bct-cprod-p3701-0000.dts)... done. copying prod_config(/path/JetPack_6.0_DP_Linux_DP_JETSON_AGX_ORIN_TARGETS/Linux_for_Tegra/bootloader/generic/BCT/tegra234-mb1-bct-prod-p3701-0000.dts)... done. copying scr_config(/path/JetPack_6.0_DP_Linux_DP_JETSON_AGX_ORIN_TARGETS/Linux_for_Tegra/bootloader/generic/BCT/tegra234-mb2-bct-scr-p3701-0000.dts)... done. copying wb0sdram(/path/JetPack_6.0_DP_Linux_DP_JETSON_AGX_ORIN_TARGETS/Linux_for_Tegra/bootloader/generic/BCT/tegra234-p3701-0000-wb0sdram-l4t.dts)... done. copying bootrom_config(/path/JetPack_6.0_DP_Linux_DP_JETSON_AGX_ORIN_TARGETS/Linux_for_Tegra/bootloader/generic/BCT/tegra234-mb1-bct-reset-p3701-0000.dts)... done. Existing uphylane_config(/path/JetPack_6.0_DP_Linux_DP_JETSON_AGX_ORIN_TARGETS/Linux_for_Tegra/bootloader/tegra234-mb1-bct-uphylane-si.dtsi) reused. copying dev_params(/path/JetPack_6.0_DP_Linux_DP_JETSON_AGX_ORIN_TARGETS/Linux_for_Tegra/bootloader/generic/BCT/tegra234-br-bct-p3701-0000.dts)... done. copying dev_params_b(/path/JetPack_6.0_DP_Linux_DP_JETSON_AGX_ORIN_TARGETS/Linux_for_Tegra/bootloader/generic/BCT/tegra234-br-bct_b-p3701-0000.dts)... done. copying mb2bct_cfg(/path/JetPack_6.0_DP_Linux_DP_JETSON_AGX_ORIN_TARGETS/Linux_for_Tegra/bootloader/generic/BCT/tegra234-mb2-bct-misc-p3701-0000.dts)... done. Existing pscfwfile(/path/JetPack_6.0_DP_Linux_DP_JETSON_AGX_ORIN_TARGETS/Linux_for_Tegra/bootloader/pscfw_t234_prod.bin) reused. Existing pscbl1file(/path/JetPack_6.0_DP_Linux_DP_JETSON_AGX_ORIN_TARGETS/Linux_for_Tegra/bootloader/psc_bl1_t234_prod.bin) reused. Existing mtsmcefile(/path/JetPack_6.0_DP_Linux_DP_JETSON_AGX_ORIN_TARGETS/Linux_for_Tegra/bootloader/mce_flash_o10_cr_prod.bin) reused. Existing tscfwfile(/path/JetPack_6.0_DP_Linux_DP_JETSON_AGX_ORIN_TARGETS/Linux_for_Tegra/bootloader/tsec_t234.bin) reused. Existing mb2applet(/path/JetPack_6.0_DP_Linux_DP_JETSON_AGX_ORIN_TARGETS/Linux_for_Tegra/bootloader/applet_t234.bin) reused. Existing bootloader(/path/JetPack_6.0_DP_Linux_DP_JETSON_AGX_ORIN_TARGETS/Linux_for_Tegra/bootloader/mb2_t234.bin) reused. copying initrd(/path/JetPack_6.0_DP_Linux_DP_JETSON_AGX_ORIN_TARGETS/Linux_for_Tegra/rootfs/boot/initrd)... done. bl is uefi Making Boot image... done. Not signing of boot.img Making recovery ramdisk for recovery image... Re-generating recovery ramdisk for recovery image... /path/JetPack_6.0_DP_Linux_DP_JETSON_AGX_ORIN_TARGETS/Linux_for_Tegra/bootloader/ramdisk_tmp /path/JetPack_6.0_DP_Linux_DP_JETSON_AGX_ORIN_TARGETS/Linux_for_Tegra/bootloader /path/JetPack_6.0_DP_Linux_DP_JETSON_AGX_ORIN_TARGETS/Linux_for_Tegra 52057 blocks gzip: /path/JetPack_6.0_DP_Linux_DP_JETSON_AGX_ORIN_TARGETS/Linux_for_Tegra/kernel/Image: not in gzip format /path/JetPack_6.0_DP_Linux_DP_JETSON_AGX_ORIN_TARGETS/Linux_for_Tegra/tools/ota_tools/version_upgrade/ota_make_recovery_img_dtb.sh: line 179: strings: command not found ERROR: failed to get kernel version from /path/JetPack_6.0_DP_Linux_DP_JETSON_AGX_ORIN_TARGETS/Linux_for_Tegra/kernel/Image ``` I’m using a Ubuntu 22.04 host (freshly installed) I’m wondering if I don’t need to install some packages first. ---
**Author:** ![younes.khadraoui](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@younes.khadraoui](https://forums.developer.nvidia.com/u/younes.khadraoui)\ **Post date:** [March 1, 2024, 4:30pm UTC](https://forums.developer.nvidia.com/t/error-might-be-timeout-in-usb-write/284646/4 "2024-03-01T16:30:12Z")
I was able to move on on this. Needed to install binutils first: ```auto sudo apt-get install binutils ``` After that, I found out that there is two Image files in the folder kernel. Image (41Mb) and the other one Image.gz (14Mb). I don’t know if that’s the right thing to do, but since the Image file was not in gzip format as mentionned by the error before, I renamed the Image.gz to Image. So the flash worked and finished. However, the device does not boot anymore. I get into the Nvidia boot screen, but it hangs forever on a black screen after that. So I guess what I did was a mistake as it was the kernel Image. Any idea ? ---
**Author:** ![WayneWWW](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/waynewww/32/14043_2.png) [@WayneWWW](https://forums.developer.nvidia.com/u/WayneWWW)\ **Post date:** [March 1, 2024, 4:32pm UTC](https://forums.developer.nvidia.com/t/error-might-be-timeout-in-usb-write/284646/5 "2024-03-01T16:32:50Z")
Hi, > After that, I found out that there is two Image files in the folder kernel. > Image (41Mb) and the other one Image.gz (14Mb). What you are doing is not necessary. Please restore it back… and flash it. ---
**Author:** ![younes.khadraoui](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@younes.khadraoui](https://forums.developer.nvidia.com/u/younes.khadraoui)\ **Post date:** [March 1, 2024, 5:42pm UTC](https://forums.developer.nvidia.com/t/error-might-be-timeout-in-usb-write/284646/6 "2024-03-01T17:42:50Z")
Thanks @WayneWWW . Indeed, the system was flashed. However, after booting the device, I get into the Linux configuration sreen (for configuring users). It starts installing but stops and I find myself in an empty desktop. dmesg says " Please complete system configuration setup on dekstop to proceed". I tried rebooting, I end up on the same screen like the system is not installed. However, when trying the same computer name, it says that it already exists on the network. ---
**Author:** ![WayneWWW](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/waynewww/32/14043_2.png) [@WayneWWW](https://forums.developer.nvidia.com/u/WayneWWW)\ **Post date:** [March 1, 2024, 5:45pm UTC](https://forums.developer.nvidia.com/t/error-might-be-timeout-in-usb-write/284646/7 "2024-03-01T17:45:16Z")
Could you directly flash your board with sdkmanager instead of the BSP preparing by yourself? I guess your BSP isn’t from sdkmanager, right? ---
**Author:** ![younes.khadraoui](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@younes.khadraoui](https://forums.developer.nvidia.com/u/younes.khadraoui)\ **Post date:** [March 1, 2024, 5:48pm UTC](https://forums.developer.nvidia.com/t/error-might-be-timeout-in-usb-write/284646/8 "2024-03-01T17:48:18Z")
The BSP comes from the vendor himself. ---
**Author:** ![kayccc](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/kayccc/32/14043_2.png) [@kayccc](https://forums.developer.nvidia.com/u/kayccc)\ **Post date:** [March 13, 2024, 6:37am UTC](https://forums.developer.nvidia.com/t/error-might-be-timeout-in-usb-write/284646/9 "2024-03-13T06:37:24Z")
Then suggest to contact with vendor for the support. Thanks ---
**Author:** ![system](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/system/32/68080_2.png) [@system](https://forums.developer.nvidia.com/u/system)\ **Post date:** [March 27, 2024, 6:38am UTC](https://forums.developer.nvidia.com/t/error-might-be-timeout-in-usb-write/284646/10 "2024-03-27T06:38:20Z")
Closed on March 27, 2024, 6:38am UTC This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.