Hi all! Really hope someone can lend a hand here :)
I’m having trouble trying to build a small cluster of Nano’s (not connected to the internet). The main problem being the erratic behaviour of the network. I’m using 1 tp-link 5-port gigabit switch and two Nano’s. (I have also tried using another switch and another router)
So when I create a wired network profile and set manual IP’s (I used 10.0.0.11-12 and network mask of 255.255.255.0) pinging the other device delivers erratic responses. Sometimes it just works, the other time there is 100% packages dropped, and this morning it was around 50% dropped. Also, any attempt to ssh into either board fails.
When I tried the router, I tried using the automatic network settings. For some reason though the boards where assigned the exact same IP! I then also set some manual IP’s (which where 192.168.8.111-112) to no avail. Additionally I have tried connecting my laptop to the same router/switch, and found that pinging from the laptop followed the same pattern of working, not working, and somewhat working, with ssh never working.
If anyone can lend me some thoughts, I would be really grateful!