Ethernet Configuration Assistance for AGX Orin Custom Carrier Board

Hello Team,

We are currently involved in developing a custom carrier board with AGX Orin 32GB. The AGX Orin dev kit utilizes the 10G Ethernet port, and alongside that, we are also using RGMII. I have activated the pins (EQOS) in the pinmux template and flashed them to the custom board. RGMII is connected to the Marvel 88E1512PB2-NNP2C000 chip, and the outputs are directed to the RJ45 connector. Ethernet is not yet detected. Could you please let us know if changes need to be made or if we need to add configurations for Ethernet QOS? If yes, could you provide the file name?

Your assistance will be greatly appreciated.
pinmux.dtsi.txt (3.0 KB)

Thanks,
Parashuram

please refer to document:

https://docs.nvidia.com/jetson/archives/r35.4.1/DeveloperGuide/text/HR/JetsonModuleAdaptationAndBringUp/JetsonAgxOrinSeries.html?highlight=mdio#for-rgmii

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.