# Ethernet 

**URL:** <https://forums.developer.nvidia.com/t/ethernet/55381>\
**Category:** General\
**Created:** [November 20, 2017, 8:33am UTC](https://forums.developer.nvidia.com/t/ethernet/55381 "2017-11-20T08:33:48Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![elikh](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@elikh](https://forums.developer.nvidia.com/u/elikh)\
**Post date:** [November 20, 2017, 8:33am UTC](https://forums.developer.nvidia.com/t/ethernet/55381/1 "2017-11-20T08:33:48Z")

</div>

Hi,  
I would like to plan integration with the drive px2 platform.  
I would like to deliver raw data through 10Gb/s Ethernet interface.

What is the exact Ethernet standard which is supported by the device?  
What are the integration guidelines (HW and SW) to be able to work with it?

Thanks

Elik

---

<div class="post-metadata">

**Author:** ![SteveNV](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/stevenv/32/14043_2.png) [@SteveNV](https://forums.developer.nvidia.com/u/SteveNV)\
**Post date:** [November 20, 2017, 10:31am UTC](https://forums.developer.nvidia.com/t/ethernet/55381/2 "2017-11-20T10:31:06Z")

</div>

Dear elikh,

Could you please refer to below link to install DPX2 in a car?

> **[NVIDIA DRIVE Downloads](https://developer.nvidia.com/drive/downloads)**
>
> This page provides access to DRIVE SDK for developers using NVIDIA DRIVE® hardware. See Automotive Hardware and Automotive Software for more details. For support, please post any queries or issues in the Forums. Please note, download requires...

We provide DRIVE PX 2 Cruise and AutoChauffeur Mechanical and Installation Guide. Thanks.

---

<div class="post-metadata">

**Author:** ![elikh](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@elikh](https://forums.developer.nvidia.com/u/elikh)\
**Post date:** [November 20, 2017, 2:17pm UTC](https://forums.developer.nvidia.com/t/ethernet/55381/3 "2017-11-20T14:17:59Z")

</div>

Hi,  
I am looking at this stage for the physical layer.  
So the main question is related to the Ethernet standard supported for 10Gb/s.

The link seems to be related to SW support.

---

<div class="post-metadata">

**Author:** ![SteveNV](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/stevenv/32/14043_2.png) [@SteveNV](https://forums.developer.nvidia.com/u/SteveNV)\
**Post date:** [November 21, 2017, 4:35am UTC](https://forums.developer.nvidia.com/t/ethernet/55381/4 "2017-11-21T04:35:54Z")

</div>

Dear elikh,

I think you are using DrivePX2.  
Could you please let me know if you have any issue for DrivePX2 10Gb/s ethernet? Thanks.

---

<div class="post-metadata">

**Author:** ![herry](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@herry](https://forums.developer.nvidia.com/u/herry)\
**Post date:** [December 15, 2017, 11:02am UTC](https://forums.developer.nvidia.com/t/ethernet/55381/5 "2017-12-15T11:02:34Z")

</div>

Dear SteveNV,

I am using DrivePX2.  
I want to use 7 camera to record raw data to a nfs server,but recorder-qt returned drop frame errors.  
Then, I use dd to test the transfer speed.

dd if=/dev/zero of=/mnt/nfs/test bs=1024K count=102400

==\>19445500416 bytes (18 GB) copied, 172.086 s, 113 MB/s

How can I speed up it?

---

<div class="post-metadata">

**Author:** ![SteveNV](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/stevenv/32/14043_2.png) [@SteveNV](https://forums.developer.nvidia.com/u/SteveNV)\
**Post date:** [December 19, 2017, 1:01pm UTC](https://forums.developer.nvidia.com/t/ethernet/55381/6 "2017-12-19T13:01:43Z")

</div>

Dear herry,

Could you please refer to DriveWorks DevGuide.pdf in DPX2?  
Please see page 98(Recording at a Framerate Other Than 30 FPS. Thanks.