# Failed to bind partitions!

**URL:** <https://forums.developer.nvidia.com/t/failed-to-bind-partitions/124124>\
**Category:** DRIVE AGX Xavier General\
**Tags:** drivesw-installation\
**Created:** [May 21, 2020, 4:02am UTC](https://forums.developer.nvidia.com/t/failed-to-bind-partitions/124124 "2020-05-21T04:02:50Z")\
**Posts on this page:** 12\
**Page:** 1

<div class="post-metadata">

**Author:** ![lijie2019](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/lijie2019/32/20422_2.png) [@lijie2019](https://forums.developer.nvidia.com/u/lijie2019)\
**Post date:** [May 21, 2020, 4:02am UTC](https://forums.developer.nvidia.com/t/failed-to-bind-partitions/124124/1 "2020-05-21T04:02:50Z")

</div>

When possible, please provide the following info:  
Hardware Platform: [: DRIVE AGX Xavier™ Developer Kit]  
Software Version: [: DRIVE Software 10]  
Host Machine Version: [: native Ubuntu 18.04]  
SDK Manager Version: [: 1.1.0.6343]

```
09:27:54 INFO : Flash Xavier A+B in parallel : Processor found in ttyUSB3
09:27:54 INFO : Flash Xavier A+B in parallel : Aurix port /dev/ttyUSB3 found. Fetching board revision from InfoROM …
09:27:57 INFO : Flash Xavier A+B in parallel : Failed to bind partitions!
09:27:59 INFO : Flash Xavier A+B in parallel : pdkinstaller cannot continue! Check the log file for details: /home/j1/nvidia/nvidia_sdk/DRIVE_Software_10.0_Linux_OS_DDPX/DRIVEOS/pdkinstaller/pdkinstaller.log
09:27:59 ERROR : Flash Xavier A+B in parallel :
09:27:59 INFO : Flash Xavier A+B in parallel :
09:27:59 ERROR : Flash Xavier A+B in parallel : [exec_command]: /bin/bash -c cd pdkinstaller && ./pdkinstaller --installtype bindflash --boardtype ES --pdkinstalledpath /home/j1/nvidia/nvidia_sdk/DRIVE_Software_10.0_Linux_OS_DDPX/DRIVEOS --configjson ./manifests/install_pdk_config/av_ddp_pegasus_hyp71_linux_tegraAB_install_config.json --consoleout enable; [error]: exit status 140
09:27:59 INFO : Flash Xavier A+B in parallel : [Component Install Finished with Error]
09:27:59 INFO : Flash Xavier A+B in parallel : [529.35 MB used. Disk Avail: 319.93 GB]
09:27:59 INFO : Flash Xavier A+B in parallel : [NV_FLASH_XAVIER_PDKFLASH_PARALLEL_COMP Install took 8m44s]
09:27:59 ERROR : Flash Xavier A+B in parallel : [error]: Run commands failed at step Install: command cd pdkinstaller && ./pdkinstaller --installtype bindflash --boardtype ES --pdkinstalledpath /home/j1/nvidia/nvidia_sdk/DRIVE_Software_10.0_Linux_OS_DDPX/DRIVEOS --configjson ./manifests/install_pdk_config/av_ddp_pegasus_hyp71_linux_tegraAB_install_config.json --consoleout enable finished with error
09:27:59 INFO : Flash Xavier A+B in parallel :
09:27:59 ERROR : Flash Xavier A+B in parallel : command terminated with error
09:28:01 ERROR : Flash Xavier A+B in parallel : Install ‘Flash Xavier A+B in parallel’ failure, command < using adapter to install NV_FLASH_XAVIER_PDKFLASH_PARALLEL_COMP@DDPX to /home/j1/nvidia/nvidia_sdk/DRIVE_Software_10.0_Linux_OS_DDPX > terminated with error.
09:28:03 INFO : All done!

```

[pdkinstaller.log](https://forums.developer.nvidia.com/uploads/short-url/glwJIpkVSIeuaaKkNCaGjmmIlLx.log) (15.5 KB)

---

<div class="post-metadata">

**Author:** ![SivaRamaKrishnaNV](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/sivaramakrishnanv/32/14043_2.png) [@SivaRamaKrishnaNV](https://forums.developer.nvidia.com/u/SivaRamaKrishnaNV)\
**Post date:** [May 21, 2020, 4:50am UTC](https://forums.developer.nvidia.com/t/failed-to-bind-partitions/124124/2 "2020-05-21T04:50:20Z")

</div>

Dear @lijie2019,  
Could you share the whole sdkm logs(~/.nvsdkm/ folder) and output of uname -a

---

<div class="post-metadata">

**Author:** ![lijie2019](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/lijie2019/32/20422_2.png) [@lijie2019](https://forums.developer.nvidia.com/u/lijie2019)\
**Post date:** [May 21, 2020, 5:37am UTC](https://forums.developer.nvidia.com/t/failed-to-bind-partitions/124124/3 "2020-05-21T05:37:04Z")

</div>

the output of uname -a is :  
Linux a8 5.3.0-28-generic #30~18.04.1-Ubuntu SMP Fri Jan 17 06:14:09 UTC 2020 x86\_64 x86\_64 x86\_64 GNU/Linux

[sdkm.log](https://forums.developer.nvidia.com/uploads/short-url/77ZJXFs5whBqdfzI0GTWTseiVcI.log) (76.2 KB)

---

<div class="post-metadata">

**Author:** ![SivaRamaKrishnaNV](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/sivaramakrishnanv/32/14043_2.png) [@SivaRamaKrishnaNV](https://forums.developer.nvidia.com/u/SivaRamaKrishnaNV)\
**Post date:** [May 21, 2020, 6:47am UTC](https://forums.developer.nvidia.com/t/failed-to-bind-partitions/124124/4 "2020-05-21T06:47:07Z")

</div>

Dear @lijie2019,  
Please attach the whole ~/.nvsdkm/ folder not just sdkm.log file. Also, could you check flashing the individual tegras to see if it works.

---

<div class="post-metadata">

**Author:** ![lijie2019](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/lijie2019/32/20422_2.png) [@lijie2019](https://forums.developer.nvidia.com/u/lijie2019)\
**Post date:** [May 21, 2020, 7:07am UTC](https://forums.developer.nvidia.com/t/failed-to-bind-partitions/124124/5 "2020-05-21T07:07:49Z")

</div>

Hi,  
Because the .zip file is not allowed to be uploaded, so I rename it to .zip.log:

[.nvsdkm.zip.log](https://forums.developer.nvidia.com/uploads/short-url/1K7QLdV2mfvVzMYHZq85DZ64aF.log) (2.8 MB)

to flash the AGX Device, I do the following preparations:

1. switch the MCU to “PRG”
2. use the USB A-A CABLE to connect the debug USB to a USB2.0 port of the host machine

what operations are different for "flashing the individual tegras " ?

---

<div class="post-metadata">

**Author:** ![SivaRamaKrishnaNV](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/sivaramakrishnanv/32/14043_2.png) [@SivaRamaKrishnaNV](https://forums.developer.nvidia.com/u/SivaRamaKrishnaNV)\
**Post date:** [May 21, 2020, 7:18am UTC](https://forums.developer.nvidia.com/t/failed-to-bind-partitions/124124/6 "2020-05-21T07:18:41Z")

</div>

Dear @lijie2019,  
While flashing the board, you have an option choose single Tegra in sdkmanager GUI instead of parallel flash

---

<div class="post-metadata">

**Author:** ![lijie2019](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/lijie2019/32/20422_2.png) [@lijie2019](https://forums.developer.nvidia.com/u/lijie2019)\
**Post date:** [May 21, 2020, 7:31am UTC](https://forums.developer.nvidia.com/t/failed-to-bind-partitions/124124/7 "2020-05-21T07:31:30Z")

</div>

Different from the instructions: [Install DRIVE with SDK Manager :: NVIDIA SDK Manager Documentation](https://docs.nvidia.com/sdk-manager/install-with-sdkm-drive/index.html)  
there is no choice for the flash button as the following:

 ![Screenshot from 2020-05-21 15-29-36](https://global.discourse-cdn.com/nvidia/original/3X/0/7/07d1e924dfcf00c29f098ec700e9e1b6eff4f4d4.png)

---

<div class="post-metadata">

**Author:** ![shayNV](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/shaynv/32/14047_2.png) [@shayNV](https://forums.developer.nvidia.com/u/shayNV)\
**Post date:** [May 21, 2020, 9:15am UTC](https://forums.developer.nvidia.com/t/failed-to-bind-partitions/124124/8 "2020-05-21T09:15:48Z")

</div>

Hi @lijie2019,

why are you doing this step, where in the documentation or in the steps of using SDKManager you were asked to do that?

> [@lijie2019](#):
>
> switch the MCU to “PRG”

the documentation [here](https://docs.nvidia.com/drive/drive_os_5.1.6.1L/nvvib_docs/index.html#page/DRIVE_OS_Linux_SDK_Development_Guide/Board/board_e3550.html#wwpID0E0NB0HA) states explicitly to “Ensure the MCU Programming Switch is set to the RUN position.” regardless of what you plan to do with the board.

if the **same** error occurs after setting the switch to the correct position, please attache this log file:  
/home/j1/nvidia/nvidia\_sdk/DRIVE\_Software\_10.0\_Linux\_OS\_DDPX/DRIVEOS/pdkinstaller/pdkinstaller.log

thanks

---

<div class="post-metadata">

**Author:** ![lijie2019](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/lijie2019/32/20422_2.png) [@lijie2019](https://forums.developer.nvidia.com/u/lijie2019)\
**Post date:** [May 21, 2020, 11:15am UTC](https://forums.developer.nvidia.com/t/failed-to-bind-partitions/124124/9 "2020-05-21T11:15:10Z")

</div>

Thanks for your reminding, and the flash is completed with the MCU of “RUN”.

I had misunderstood “Set the device to USB Recovery Mode using Manual Setup” to “switch the MCU to PRG”.

---

<div class="post-metadata">

**Author:** ![lijie2019](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/lijie2019/32/20422_2.png) [@lijie2019](https://forums.developer.nvidia.com/u/lijie2019)\
**Post date:** [May 21, 2020, 11:34am UTC](https://forums.developer.nvidia.com/t/failed-to-bind-partitions/124124/10 "2020-05-21T11:34:10Z")

</div>

I think the instructions 3 & 4 in the screenshot are not necessary, which can mislead the users. Actually, the network connection and USB recovery mode are not necessary.

---

<div class="post-metadata">

**Author:** ![shayNV](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/shaynv/32/14047_2.png) [@shayNV](https://forums.developer.nvidia.com/u/shayNV)\
**Post date:** [May 21, 2020, 12:11pm UTC](https://forums.developer.nvidia.com/t/failed-to-bind-partitions/124124/11 "2020-05-21T12:11:02Z")

</div>

Hi @lijie2019,

thank you for you comments and feedback, we’ll work on improving the instructions.

---

<div class="post-metadata">

**Author:** ![TomNVIDIA](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/tomnvidia/32/14181_2.png) [@TomNVIDIA](https://forums.developer.nvidia.com/u/TomNVIDIA)\
**Post date:** [October 12, 2021, 8:04pm UTC](https://forums.developer.nvidia.com/t/failed-to-bind-partitions/124124/12 "2021-10-12T20:04:41Z")

</div>

Closed on October 12, 2021, 8:04pm UTC


