Failed to flash Jetson nano using flash.sh script

Autonomous Machines Jetson & Embedded Systems Jetson Nano
20

Re-flash the SD card with the same command, it successfully flashed and trigger the Jetson nano first time boots up.
Now the SDK Manager has detected the Jetson Nano being connected.
It seems that the system (flash software, interface to Jetson Nano, and software installed on Jetson Nano) is not working reliably.

After success in above (flash, boot up, connect Jetson Nano with SDK Manager), install the components on Jetson Nano failed.
Refer to the log file for details
SDKM_logs_JetPack_4.3_Linux_for_Jetson_Nano_[developer_kit_version]_2020-09-01_14-22-42.zip (180.4 KB)

I checked the Jetson Nano, it seems that the image generated by flash command has something wrong which may result the install components failure? Please refer to the photos taken from the Jetson Nano screen:

IMG_20200901_141641_resized_20200901_023817949
IMG_20200901_141641_resized_20200901_0238179491984×1120 853 KB

The software updater shows lots of installation needs to be updated (refer to photos):

IMG_20200901_141708_resized_20200901_023818170
IMG_20200901_141708_resized_20200901_0238181701984×1120 1.7 MB

IMG_20200901_141840_resized_20200901_023818771
IMG_20200901_141840_resized_20200901_0238187711984×1120 890 KB

IMG_20200901_141852_resized_20200901_023817120
IMG_20200901_141852_resized_20200901_0238171201984×1120 1.69 MB

IMG_20200901_141911_resized_20200901_023817425
IMG_20200901_141911_resized_20200901_0238174251984×1120 853 KB

I tried to update them, but failed as below:

IMG_20200901_142023_resized_20200901_023818492
IMG_20200901_142023_resized_20200901_0238184921984×1120 1.54 MB

What can I do for it?
Thanks