# Fix the problem with Balena Etcher and NVME M2 SSDs

**URL:** <https://forums.developer.nvidia.com/t/fix-the-problem-with-balena-etcher-and-nvme-m2-ssds/307712>\
**Category:** Jetson Orin Nano\
**Tags:** reflash\
**Created:** [September 24, 2024, 7:20am UTC](https://forums.developer.nvidia.com/t/fix-the-problem-with-balena-etcher-and-nvme-m2-ssds/307712 "2024-09-24T07:20:06Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![neltherion](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/neltherion/32/37788_2.png) [@neltherion](https://forums.developer.nvidia.com/u/neltherion)\
**Post date:** [September 24, 2024, 1:48pm UTC](https://forums.developer.nvidia.com/t/fix-the-problem-with-balena-etcher-and-nvme-m2-ssds/307712/4 "2024-09-24T13:48:49Z")

</div>

Device =\> Jetson Orin Nano  
Balena Etcher =\> 1.19.21

The Jetson Orin Nano was flashed with NVIDIA SDK Manager successfully but before or even after the flash, I could not boot up the Jetson with the `jp60-orin-nano-sd-card-image.zip` etched on an NVME M.2 SSD.

The errors are exactly the same as was described [here](https://forums.developer.nvidia.com/t/jetson-xavier-nx-devkit-cannot-be-flashed-on-nvme/280796/1) and the fix was exactly the same described [here](https://forums.developer.nvidia.com/t/jetson-xavier-nx-devkit-cannot-be-flashed-on-nvme/280796/8).

---

_[View the full topic](https://forums.developer.nvidia.com/t/fix-the-problem-with-balena-etcher-and-nvme-m2-ssds/307712)._