Flash error orin nano devkit

[ysf_ccc]

hi,there is an error info that i have no idea with it when flash jetson linux,could anybody helps? The upload is log file(!_!)
SDKM_logs_JetPack_6.0_(rev._2)_Linux_for_Jetson_Orin_Nano_modules_2024-07-14_02-37-05.zip (250.8 KB)

02:37:20 ERROR: Flash Jetson Linux - flash: [ 0.0104 ] ERROR: failed to read rcm_state
[SDKM_logs_JetPack_6.0_(rev._2)_Linux_for_Jetson_Orin_Nano_modules_2024-07-14_02-37-05.zip|attachment](upload://cwewYqeUs1PP3ZuNnQjDjDuDshn.zip) (250.8 KB)

02:37:20 INFO: Flash Jetson Linux - flash: [ 0.3904 ] BL: version 1.4.0.2-t234-54845784-08a4de08 last_boot_error: 0

02:37:21 ERROR: Flash Jetson Linux - flash: e:

02:37:24 ERROR: Flash Jetson Linux - flash: [ 0.0116 ] ERROR: failed to read rcm_state

02:40:47 INFO: Flash Jetson Linux - flash: [ Component Install Finished with Error ]

02:40:47 ERROR: Flash Jetson Linux - flash: command terminated with error

**02:40:47 SUMMARY: Flash Jetson Linux - flash: First Error: Installation failed.**

[linuxdev]

You’re in the older “original” Nano forum. You need to post in the Orin Nano forum:
https://forums.developer.nvidia.com/c/agx-autonomous-machines/jetson-embedded-systems/jetson-orin-nano/632

When you post be sure to state if you are using a VM or not since VMs often cause failure. You will also want to state if this is a dev kit, versus a third party carrier board. An Orin Nano dev kit has the SD card slot directly on the module itself (and no eMMC), whereas the third party modules have the SD card slot on the carrier board (with eMMC).