Flash is failed to OrinNX QSPI NOR

[sumin.lee1]

Hello,

I am trying to flash only QSPI NOR on Orin NX Module.
I followed the direction as belows

Flashing to only qspi-nor for OrinNX

I tested 2 modules. First one has succeed to flash, but the other one has failed. I would open new one for this. Anyway, I tested the module what was flashed. And I use the NVMe SSD what is cloned as follows. $ sudo rsync -axHAWX --numeric-ids --info=progress2 --exclude=/proc/ ./rootfs_target/ /mnt/ But the boot is stuck on the step as below: ** WARNING: Test Key is used. ** Start PXE over IPv4. PXE-E18: Server response timeout. Start PXE over IPv6. PXE-E16: No valid offer recei…

I tested 2 modules, First one is succeed but the other one is failed.
Please check those logs.
failed_flash_log.txt (82.1 KB)
failed_debug_uart.txt (16.8 KB)

[WayneWWW]

How about use the original to track? It seems already have other moderator to help check.