# Flash jetson tx1 to upgrade to ubunti 20.04 **URL:** \ **Category:** Jetson TX1\ **Created:** [April 1, 2024, 11:29pm UTC](https://forums.developer.nvidia.com/t/flash-jetson-tx1-to-upgrade-to-ubunti-20-04/288116 "2024-04-01T23:29:53Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![edak223](https://developer.download.nvidia.com/images/forums/profile-default-devtalk-84.png) [@edak223](https://forums.developer.nvidia.com/u/edak223)\ **Post date:** [April 1, 2024, 11:29pm UTC](https://forums.developer.nvidia.com/t/flash-jetson-tx1-to-upgrade-to-ubunti-20-04/288116/1 "2024-04-01T23:29:53Z")
I have a jetson tx1 board that came from Roboworks on a custom robot. the device was shipped with ubuntu 18.04 and ROS 1. Anyone has video/resourse page detailing the process to flash the robot by OTG using the Nividia SDK manager software? I don’t have much physical access to the board with exception of USB ports, hdmi, reset pins etc. but no access SSD/flash memory and it has no sd card. I have all my custom and those from Roboworks libraries backed up in case I need them again so don’t mind if the flashing process erases everything ---
**Author:** ![kayccc](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/kayccc/32/14043_2.png) [@kayccc](https://forums.developer.nvidia.com/u/kayccc)\ **Post date:** [April 2, 2024, 12:55am UTC](https://forums.developer.nvidia.com/t/flash-jetson-tx1-to-upgrade-to-ubunti-20-04/288116/2 "2024-04-02T00:55:35Z")
We don’t have the support and SW for Ubuntu 20.04 on TX1. May need other developers to share experience. ---
**Author:** ![system](https://sea2.discourse-cdn.com/nvidia/user_avatar/forums.developer.nvidia.com/system/32/68080_2.png) [@system](https://forums.developer.nvidia.com/u/system)\ **Post date:** [April 16, 2024, 12:56am UTC](https://forums.developer.nvidia.com/t/flash-jetson-tx1-to-upgrade-to-ubunti-20-04/288116/3 "2024-04-16T00:56:19Z")
This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.