Flash Xavier AGX in PCIe End-Point mode without losing OpenCV installed by Sdkmanager

Robotics & Edge Computing Jetson & Embedded Systems Jetson AGX Xavier
,
1

Hi,

When I use the command

sudo ./flash.sh jetson-xavier mmcblk0p1

described in PCIe endpoint mode

I lose the OpenCV installed by Sdkmanager.

How can I reflash my Xavier AGX in EndPoint mode without losing the package installed by Sdkmanager?

Thanks

3

Not possible. This command is also how your sdkmanager flashed your board last time.

What you should is firstly make sure your ep mode is working, then open sdkmanager again and only choose to install sdk components but not reflash the board again.