Flashing Drive PX 2

Dear Sir/Mdm,

I am trying to flash the Drive PX 2 to the newest version (beta). But the manager stops after starting the minicom. Do you have an idea whats going wrong? The terminal shows me the following:

8723 ? 00:00:00 sudo_daemon
/home/grs/nvidia_beta///_installer/run_command -c="/home/grs/nvidia_beta//_installer/configure_minicom ttyUSB6 grs minirc.v4l_device.b" -d=/home/grs/nvidia_beta///_installer/tmp -l=/home/grs/nvidia_beta///_installer/logs/configure_minicom_minirc.v4l_device.b.log
The user grs' is already a member of dialout’.
8723 ? 00:00:00 sudo_daemon
/home/grs/nvidia_beta///_installer/run_command -c="/home/grs/nvidia_beta//_installer/configure_minicom ttyUSB1 grs minirc.drivepx2.aurix" -d=/home/grs/nvidia_beta///_installer/tmp -l=/home/grs/nvidia_beta///_installer/logs/configure_minicom_minirc.drivepx2.aurix.log
The user grs' is already a member of dialout’.
Lockfile is stale. Overriding it…

Welcome to minicom 2.7

Compiled on Jan 1 2014, 17:13:19.
Port /dev/ttyUSB1, 10:21:52

Press CTRL-A Z for help on special keys

Hello PGrs,

Maybe I think minicom consoles are conflicted when you install DPX2 PDK.
Please see “DriveInstall_V4.1L-” -> Page3 -> 6. Prior to flashing

b. Make sure to EXIT ALL minicom terminal windows connected to the DRIVE PX2 and DRIVE CX2 device.


Hi mania91,

yes, that was the problem. Thanks

Where do I find the DriveInstall_V4.1L-

Dear vmahulka,

Please refer to below link instead of DriveInstall_V4.1L-